Categorization:Product Information
Electronic wire harness processing production process: 1. Cutting line: check the standard type of wire is not correct; scale is not in line with the needs of the 2. Peeling skin: check the peeling mouth is not flush, can not be peeled core wire, grouping wire, etc., peeling scale is not correct. 3. grouping disposal: trimming scale is not correct, trimming is not flush, trimming grouping can not be hurt when the core wire. 4. Peeling skin: check the peeling mouth is not flush; peeling scale is not correct; there is no peeling core wire, broken copper wire; half-peel insulator can not fall. 5. set of shortening tube: check the shortening mouth is not flush; peeling scale is not correct; there is no peeling core wire, broken copper wire; half-peeling insulator can not fall. 6. Is not flush; peeling scale is not correct; there is no peeling injury to the core wire, broken copper wire; half-peeled insulator can not fall. 5. set of shortening tube: check the shortening tube scale, type is not correct. 6. ready to weld: check the temperature of the furnace is not correct; ready to weld is not the core wire before the wire is not organized, is not a forked, zigzagging, folding and so on the surface; ready to weld is not a forked wire, big head, copper wire uneven and burned. Soldering: check whether the temperature of the soldering iron is correct; can not burn the insulation skin, tin point should be lubricated, no tin tip, not fake welding, false welding. 8. terminal pressure: recognize the standard of terminals, wires is not correct; terminal pressure with or without flare, skewed, insulation skin and the core wire is not exposed is not too long or too short. 9. terminal piercing: check the connector, terminal type Is not correct; terminals have no damage, deformation and other phenomena; terminals have no leakage insertion, wrong insertion, piercing not in place and other phenomena. 10. line crimping: check the type of connector is not correct; the direction of the line is not correct; the core wire is not broken, exposed copper, burned; crimp is not in place. 11. blowing shortening tube: shorten the tube to shorten the shortening is not outstanding, can not be scalded insulating skin. 12. assembling the shell: shell Is not installed wrong, there is no scratching, burrs and other bad, there is no leakage of parts, screws have screwed hair, oxidation, discoloration, loosening and other bad, assembled without conforming to the bad; such as shell is the direction of, then be sure to put together in accordance with the needs of the 13. labeling: check the label is not the correct content, clear, no word breaks the appearance of the label; labeling scale is not the correct; labeling is not dirty, broken; labeling posted in the correct orientation. 14. Hit the tie: check the standard, color, orientation is not correct; no cracking, loose phenomenon. 15. injection molding: check the mold is not dirty, molding parts is not a lack of material, bubbles, adhesion, hardening, etc.. Check the plug molding damage, unevenness, lack of material, burrs, debris, flow lines and other defects, recognition of metal terminals without deformation, damage, exposed copper and other defects.
-16, on the BBC Electronic Products Network platform related to the introduction and sales of products brief: BBC Electronic Products Network - a professional agent / production / sales of a variety of {connectors | wiring harness | wire and cable products }; if you have a related [connectors | wiring harness | wire and cable products] purchasing / sourcing needs or would like to buy / to understand which connectors | harness | wire and cable product solutions that we can provide, please contact our Division below! Business personnel; If you have related [connectors | harness | wire and cable products] sales / resources and promotion needs, please click on the "→ Business Cooperation ←" and special people to discuss!