en

How can connector robustness and repeatability be improved?

Categorization:Product Information       

Specializing in the sales of: Connectors | Wire Harness | Cable Products

Robustness and repeatability of connectors have still not been improved sufficiently. This has led to a number of problems with instrumentation and calibration standards where higher levels of calibration, robustness and repeatability are required. Limitations of previously developed small connectors that need to be compatible with shape memory alloys affect connector performance, for example, when mating with SMA, occasional failures occur where the outer diameter of the negative center conductor (jack) becomes larger due to the very wide range of SMA dimensional tolerances, the high frequency wrap-around capability is small, and the center contact body is fragile (prone to disconnection). This was the urgent need In order to develop new coaxial connectors, it was necessary to operate at 50 GHz without mode, with high robustness and repeatability, as well as resistance to unexpected failures. With such new requirements, the mating space of the 2.4 mm connector is filled with an air medium to achieve low losses. The compensation holes in the center conductor support very high performance insulators are blind to prevent dust from entering the connector. There is enough distance between the two insulators to minimize interaction. Center conductor jacks are available in four-slot construction (for production and instrumentation levels) and slotless construction (for metrology levels).-2、About Evergrande Electronic Products Network platform related to the introduction and sales of products briefly: Evergrande Electronic Products Network - a professional agent / production / sales of a variety of {connectors | wiring harness | wire and cable products }; if you have a related [connectors | wiring harness | wire and cable products] purchasing / sourcing needs or would like to buy / to understand what connectors | harness | wire and cable products we can provide solutions, please contact the following Division I business personnel; If you have related [connectors | wire harness | wire and cable products] sales / resources and promotion needs, please click on the "¡¡ Business Cooperation ←" with the person to discuss!