What are some of the more problematic areas for terminal wires?

Terminal line in the electrical line is always a lot of joints such as wires and wires, wires and switches, wires and electrical appliances junction stakes, wires and protective devices such as joints and other parts of the wire are not the same as in the joints, the insulation layer is stripped, if the cloth wrapped around the poor and produce two lines touch, it may constitute a short circuit, fever or electric sparks. So the terminal line is more likely to present a problem where is it? The following Huicheng yuan electronic to give you an introduction. Terminal line terminals in the insertion of the tightness of the line is one of the reasons that affect the quality of the terminal line operation, for example, some of the terminal line although the quality of the wire is very good, but due to the poor quality of the terminals in the terminal, the terminal mouth batch of fronts as well as in the two-eye insertion with the other end, it will be presented very easy to disengage from the phenomenon, so for the acquisition of similar to the relevant wires, it must be the need to pay attention to the quality of the terminal line of the terminal line problem, otherwise due to the A detail of the presentation of the poor, affecting a line of work, of course, it is not worth the loss.

Secondly, a high-quality terminal wire is not only the normal operation of the equipment to protect, but also conducive to the equipment for a long time to operate the certificate? Even when the wire does not present a problem, but also due to the poor quality of the terminal port and screening, an excellent company is not due to the production of high-quality products, high-quality level of service is more important, and then not due to the product presents a problem that can not be solved, so in the production and testing of the terminal line, the more focus on each link requirements. For the detection process in the terminal line, a company's quality control department is also very key to the effect of the company's production has played a leading role in the supervision, and each member is a part of the enterprise, so in the long production, but also the need for each part of the teamwork, more helpful in some of the minor problems in the control. The above content is the terminal line is more likely to present the problem of what is the introduction of the process of using the terminal line will often produce a variety of problems. Lead to the problem of burnt black. If the terminal line black, one of the possibilities is not necessarily burned black, oxidation may also be black. We can use a finger to rub, if you can wipe off, like soot, that is oxidized and the formation of black material, have to use sandpaper or file to.

2, on the federal electronic products network platform related to the introduction and sales of products brief: federal electronic products network - a professional agent / production / sales of all kinds of [connectors | wiring harness | wire and cable products]; if you have a related [connectors | wiring harness | wire and cable products] purchasing / sourcing needs or would like to buy / to understand which connectors | wiring harness | wire and cable products we can provide solutions, please contact our business staff below; If you have related [connectors | harness | wire and cable products] sales / resources and promotion needs, please click on the ¡¡ Business Cooperation ← ¡" and specialists to discuss!