Precautions for using an electric bicycle wiring harness

The development prospects of the industry of electric bicycle wiring harness is very good, because of the use of more benefits for the enterprise, so it is favored by the customers, in order to let you more it, the next we will talk about the use of electric bicycle wiring harness precautions.　　People should pay attention to the effect of water on the electric bicycle wiring harness when using it, if rainwater enters the wiring harness, it will lead to the oxidation of some of the connectors of the wiring harness, which will lead to this phenomenon. Sometimes the tension will not transfer. So, you will find that electric bikes should not be left in the rain for long periods of time because rain is acidic and prolonged rain will oxidize the wiring faster. If you have just come out of the rain, don't use it right away, put it indoors or in a dry place and wait for the rain to recede before you use the whole machine, otherwise it will cause fire to burn the whole machine. Remove the accessories. Or if you use the electric bike for more than half a year to one year, it is recommended to go to the after-sales service to check whether the wiring is leaking or peeling. If it is, please replace the wiring harness of the electric bicycle. Immediately the whole vehicle, otherwise it may cause serious consequences. For the safety of you and others, please check your vehicle wiring regularly.

The electric bicycle wiring harness also needs your attention to the appearance of the finish. It is recommended that the replacement electronic wire harness must be compatible with the original electronic wire harness. Compare the new wiring harness with the original, such as size, wire connector joints, wire color, etc. The wire terminals and wires are connected reliably, and you can pull each connector and wire by hand to see if there is anything loose or off. The next thing to consider is processing, installation and use. What you need to know is that for its installation, each electrical device connector, plug, socket must be matched with the plug and socket of the wire harness. When the equipment is connected, there should be a certain margin, and the wire should not be pulled too tight or too loose; it should also be noted that the electric bicycle wiring harness is processed, inspected and tested. Battery ground can be disconnected for radical testing, with 12V, 20W bulb as a test light, test light series connected between the negative terminal of the battery and the frame ground terminal. At the same time, turn off all electrical switches on the car; it is suitable for checking the wiring of electronic equipment. Whether it is correctly connected.　　The content of the above article is for your friends about the use of electric bicycle wiring harness precautions, I hope the content is helpful to you!

2, on the 3M electronic products network platform related to the introduction and sales of products brief: 3M electronic products network - professional agent / production / sales of a variety of {connectors | wiring harness | wire and cable products }; if you have a related [connectors | wiring harness | wire and cable products] purchasing / sourcing needs or would like to buy / to understand which connectors | wiring harness | wire and cable products we can provide solutions, please contact the Division I business personnel below; If you have related [connectors | harness | wire and cable products] sales / resources and promotion needs, please click on the ¡¡ Business Cooperation ← ¡" to discuss with a person!