Categorization：Harness Component
I-PEX | CABLINE ® -vs II/20847 Series | 20p/30p/40p Very Thin Coaxial Harness is produced by I-PEX: fully shielded, with mechanical locking, suitable for high-speed data transmission (20 Gbps/lane), 0.5 mm pitch, horizontal plug-in, CABLINE ® -vs II/very thin coaxial line connector of 20847 series is combined with very thin coaxial line (AWG): # 36 # 38 # 40 # 42 # 44 # 46.
1、 Japan I-PEX | CABLINE ® -vs II/20847 Series | 20p/30p/40p Very Thin Coaxial Harness Connector Specifications and Features and Pictures: Fully shielded, with mechanical lock, suitable for high-speed data transmission (20 Gbps/lane), 0.5 mm pitch, The fully shielded and multi-point grounding design of ZenShield ®, a horizontally pluggable very thin coaxial line connector, A mechanical loc cover for effectively prevent EMI leakage prevents that connector from being incompletely embedded and fall off in high-speed transmission, Ideal for Thunderbolt 3 (20 Gbps/lane) Applications Pin Pitch (mm): 0.500 Height: 1.20 Max Available Pins: 20 30 40 AWG: # 36 # 38 # 40 # 42 # 44 # 46 Chimera Type: Horizontal
2、 Japan I-PEX | CABLINE ® -vs II/20847 Series | 20p/30p/40p Extremely Thin Coaxial Harness Connector Part/Model List:
| Part Number Description | Pin count | Part Number | |
| PLUG FOR CABLE ASSEMBLY | 20 | 20846-020T-01 | |
| 30 | 20846-030T-01 | ||
| 40 | 20846-040T-01 | ||
| Plug parts | PLUG HOUSING | 20 | 20847-020T-01 |
| 30 | 20847-030T-01 | ||
| 40 | 20847-040T-01 | ||
| PLUG SHELL | 20 | 3427-0201 | |
| 30 | 3427-0301 | ||
| 40 | 3427-0401 | ||
| PLUG LOCK BAR ASSEMBLY | 20 | 20848-020T-01 | |
| 30 | 20848-030T-01 | ||
| 40 | 20848-040T-01 | ||
| RECEPTACLE | 20 | 20849-020E-01 | |
| 30 | 20849-030E-01 | ||
| 40 | 20849-040E-01 | ||
3、 Japan I-PEX | CABLINE ® -vs II/20847 Series | Extremely Thin Coaxial Wire Structure/Wire Diameter Schematic Drawing for 20p/30p/40p Extremely Thin Coaxial Wire Harness:
4、 Japan I-PEX | CABLINE ® -vs II/20847 Series | 20p/30p/40p Ultra-thin Coaxial Wire Harness Production Process Brief Description: The main process of wire harness preparation:
4.1: Prepare the cable assembly 4.2: Install the cable assembly to the male body assembly and solder the exposed wire to the male signal terminal 4.3: Position the latch assembly (or latch) Male part 4.4: Cover the male housing and solder the required area to complete the male harness First, prepare the very thin coaxial line to facilitate the harness assembly. Pretreated cables are referred to as cable assemblies. This pretreatment simplifies the cable welding process of the connector and improves the stability of the quality of the male harness. This is done before the cable is soldered to the connector.
Condly, the outer conductor of the cable is welded on the connector shell, and the outer conductor of the cable is electrically connected with the PCB through the connector to obtain good grounding characteristics.
5、 Japan I-PEX | CABLINE ® -vs II/20847 Series | 20p/30p/40p Very Thin Coaxial Harness Product Picture (Picture is for reference only):
5、 Japan I-PEX | CABLINE ® -vs II/20847 Series | 20p/30p/40p Very Thin Coaxial Wire Harness Manufacturer/Distributor:
“Without the consent or authorization of this site, no one shall reproduce, reprint, distribute, cite, change, broadcast or publish the content in whole or in part in any form, nor shall there be any other violation of the copyright of this site.
