I-PEX|CABLINE®-CAL/20777 Series|30P/40P Extremely Fine Coaxial Wire Harnesses

I-PEX | CABLINE ® -CAL/20777 Series | 30p/40p Very Thin Coaxial Harness is produced by I-PEX: 0.4 mm pitch, horizontal mating style, very thin coaxial connectors with mechanical locking (mating height: 0.8 mm Max), Harness composed of very thin coaxial line connector of CABLINE ® -CAL/20777 series and very thin coaxial line (AWG): # 38 # 40 # 42 # 44 # 46.

1、 Japan I-PEX | CABLINE ® -CAL/20777 series | Specifications, features and pictures of connectors used in 30p/40p ultra-thin coaxial harnesses: 0.4 mm pitch, horizontal plug style, Very thin coaxial connectors with mechanical locking (mating height: 0.8 mm Max) are suitable for high-rate transmission of connectors in low spaces. Ideal for Thunderbolt ™ 3 (20 Gbps/lane) applications Mechanical latch prevents semi-mating and connector ejection/unmating Contact Spacing (mm): 0.400Height: 0.80 Max (0.70 Nom.), Available Pin Number: 30 40 AWG: # 38 # 40 # 42 # 44 # 46 Fitting Type: Horizontal

2、 Japan I-PEX | CABLINE ® -CAL/20777 Series | 30p/40p Very Thin Coaxial Harness Connector Part/Model List:

3、 Japan I-PEX | CABLINE ® -CAL/20777 Series | 30p/40p Very Thin Coaxial Wire Harness Used Very Thin Coaxial Wire Structure/Diameter Schematic Reference Drawing:

4、 Japan I-PEX | CABLINE ® -CAL/20777 Series | 30p/40p Very Thin Coaxial Wire Harness Production Process Brief Description: The main process of wire harness preparation:

4.1: Prepare the cable assembly 4.2: Install the cable assembly to the male body assembly and solder the exposed wire to the male signal terminal 4.3: Position the latch assembly (or latch) Male part 4.4: Cover the male housing and solder the required area to complete the male harness First, prepare the very thin coaxial line to facilitate the harness assembly. Pretreated cables are referred to as cable assemblies. This pretreatment simplifies the cable welding process of the connector and improves the stability of the quality of the male harness. This is done before the cable is soldered to the connector.

Condly, the outer conductor of the cable is welded on the connector shell, and the outer conductor of the cable is electrically connected with the PCB through the connector to obtain good grounding characteristics.

5、 Japan I-PEX | CABLINE ® -CAL/20777 Series | 30p/40p Very Thin Coaxial Harness Product Picture (Picture is for reference only)

6、 Japan I-PEX | CABLINE ® -CAL/20777 Series | 30p/40p Very Thin Coaxial Wire Harness Manufacturer/Distributor: