Categorization：Harness Component
I-PEX | CABLINE ® -vs/20454 Series | 20p/30p/40p/50p Very Thin Coaxial Harness Produced by I-PEX: 0.5 mm pitch, horizontal butt plug style, very thin coaxial connectors with mechanical locking, CABLINE ® -vs/20454 series very thin coaxial line connectors and very thin coaxial line (AWG): # 36 # 38 # 40 # 42 # 44 # 46 combined harness.combined harness.
1、 Japan I-PEX | CABLINE ® -vs/20454 series | 20p/30p/40p/50p very thin coaxial harness connector specifications and features and pictures: 0.5 mm pitch, horizontal plug style, Extremely thin coaxial connectors with mechanical lock Ideal for high speed transmission inside electronic devices USB4/Thunderbolt 4 (20 Gbps/lane) Mechanical lock prevents connectors from being incompletely mated/unmated and falling out I-PEX VS Series Multiple Connectors Optional Contact Pitch (mm): 0.500Height: 1.10 Max (1.00 Nom.), available Pin number: 20 30 40 50 AWG: # 36 # 38 # 40 # 42 # 44 # 46 Fitting type: Horizontal
2、 Japan I-PEX | CABLINE ® -vs/20454 Series | 20p/30p/40p/50p Very Thin Coaxial Harness Connector Part/Model List:
| Part Number Description | Pin count | Part Number | |
| PLUG FOR CABLE ASSEMBLY | 20 | 20453-220T-03 | |
| 30 | 20453-230T-03 | ||
| 40 | 20453-240T-03 | ||
| 50 | 20453-250T-03S | ||
| Plug parts | PLUG HOUSING | 20 | 20454-220T |
| 30 | 20454-230T | ||
| 40 | 20454-240T | ||
| 50 | 20454-250T-01 | ||
| PLUG SHELL | 20 | 2574-0202 | |
| 30 | 2574-0302 | ||
| 40 | 2574-0402 | ||
| 50 | 2574-0502 | ||
| PLUG PULL BAR | 20 | 2576-120-00 | |
| 30 | 2576-130-00 | ||
| 40 | 2576-140-00 | ||
| 50 | 2576-150-00 | ||
| RECEPTACLE | 20 | 20455-A20E-76 | |
| 30 | 20455-030E-76 | ||
| 40 | 20455-040E-76 | ||
| 50 | 20455-050E-76 | ||
3、 Japan I-PEX | CABLINE ® -vs/20454 Series | 20p/30p/40p/50p Extremely Thin Coaxial Wire Structure/Wire Diameter Schematic Drawing of Extremely Thin Coaxial Wire Harness:
4、 Japan I-PEX | CABLINE ® -vs/20454 Series | 20p/30p/40p/50p Ultra-thin Coaxial Wire Harness Production Process Brief Description: The main process of wire harness preparation:
4.1: Prepare the cable assembly 4.2: Install the cable assembly to the male body assembly and solder the exposed wire to the male signal terminal 4.3: Position the latch assembly (or latch) Male part 4.4: Cover the male housing and solder the required area to complete the male harness First, prepare the very thin coaxial line to facilitate the harness assembly. Pretreated cables are referred to as cable assemblies. This pretreatment simplifies the cable welding process of the connector and improves the stability of the quality of the male harness. This is done before the cable is soldered to the connector.
Condly, the outer conductor of the cable is welded on the connector shell, and the outer conductor of the cable is electrically connected with the PCB through the connector to obtain good grounding characteristics.
5、 Japan I-PEX | CABLINE ® -vs/20454 Series | 20p/30p/40p/50p Very Thin Coaxial Wire Harness Product Picture (Picture is for reference only):
6、 Japan I-PEX | CABLINE ® -vs/20454 Series | 20p/30p/40p/50p Very Thin Coaxial Wire Harness Manufacturer/Distributor:
“Without the consent or authorization of this site, no one shall reproduce, reprint, distribute, cite, change, broadcast or publish the content in whole or in part in any form, nor shall there be any other violation of the copyright of this site.
