I-PEX 82287-100B-02-D CABLINE®-CA II 40AWG/50Ω series ultra-thin coaxial cable replacement

Ultra-thin coaxial cable assembly scheme for high-speed electronic equipment
With the continuous upgrades of high-speed computing equipment, intelligent terminals, industrial vision, high-definition displays, and AI hardware devices, the requirements for high-speed signal transmission cables within electronic systems are becoming increasingly stringent. The connecting cables not only need to meet the requirements for miniaturized installation but also must have good signal integrity, low transmission loss, and stable electromagnetic compatibility performance.
The I-PEX CABLINE®-CA II series 30Pin ultra-thin coaxial cable assembly is a product developed for high-density, high-speed signal connection applications. The corresponding product model is I-PEX 82287-100B-02-D, which uses a 40AWG Micro-Coaxial ultra-thin coaxial cable structure. The matching cable end connector model is 20680-030T-01, with the wire position defined as 1-N, suitable for data transmission connections between high-speed modules inside equipment.
Our company specializes in the research and development and manufacturing of ultra-fine coaxial cable assemblies, and can provide:
I-PEX 82287-100B-02-D compatible cable harness solution

Help customers achieve the localization replacement of high-speed cable harnesses and meet the performance and reliability requirements under different application scenarios.

The typical attenuation rate of a very fine coaxial cable bundle is? Analysis of high-speed transmission performance
For engineers, the cable attenuation rate is one of the important parameters for evaluating signal quality in the design of high-speed signal transmission systems. When signals are transmitted in extremely thin coaxial cables, there will be certain attenuation due to conductor resistance, dielectric loss, and high-frequency skin effect. As the transmission frequency increases, the attenuation value usually also increases gradually.
The typical attenuation rate of ultra-fine coaxial cable束 is usually related to the cable diameter specification, material structure, shielding method, and working frequency. Taking the 40AWG-level Micro-Coaxial ultra-fine coaxial cable as an example, in short-distance high-speed connection applications, its attenuation performance is generally controlled at a low level, generally expressed as signal loss within a few dB per meter (specific values need to be confirmed according to the cable structure, frequency, and test conditions). For 100mm-level short-distance cable束 applications, due to the short transmission distance, the overall insertion loss can usually be effectively controlled.
The extremely fine coaxial cable bundle has distinct advantages over ordinary wire harnesses. It internally uses a coaxial structure composed of a central conductor, an insulating layer, and a metallic shielding layer, which can effectively reduce external interference and signal crosstalk while maintaining a more stable characteristic impedance. In GHz-level high-speed signal transmission environments, its low attenuation characteristic can help the system maintain better eye diagram quality and data transmission stability.
Therefore, ultra-fine coaxial cables are particularly suitable for short-distance, high-speed, and high-reliability internal connection scenarios, such as high-speed display modules, camera modules, internal high-speed data interfaces of AI devices, and industrial control equipment, etc.

I-PEX 82287-100B-02-D ultra-fine coaxial cable assembly engineering application advantages
From the perspective of research and development design, the I-PEX 82287-100B-02-D is a typical high-speed Micro-Coaxial Harness solution, with its core advantage lying in its high-density connection capability and excellent high-speed signal transmission performance. The product adopts a 30Pin structure, which can meet the requirements of multi-channel signal transmission, while combining with 40AWG ultra-fine coaxial wire to optimize the internal space of the device.
The harness of this type is equipped with a connector model 20680-030T-01, which uses a 1-N pin definition and is suitable for application structures with one end connecting a high-speed miniature connector and the other end connecting to the system end of the equipment. This design can effectively meet the signal transfer requirements in modular electronic devices.
For procurement personnel, in addition to product performance, supply stability and alternative development capability are also important considerations. Our company has the ability to process and manufacture extremely fine coaxial cable assemblies, and can carry out customized development and mass production according to the connector specifications, cable length, wire position definition, and electrical performance requirements provided by the customer, reducing the risk of supply chain dependency.

Selection and compatibility with reference to alternative solutions and suggestions
When selecting ultra-fine coaxial cable assemblies, engineers recommend focusing on the following key parameters: connector pin count, cable specification, cable length, wire position definition, high-speed signal requirements, and equipment installation space.
For the I-PEX 82287-100B-02-D ultra-fine coaxial cable assembly scheme, the main reference parameters are as follows:
Product Part Number/Model: I-PEX 82287-100B-02-D
Cable end connector model: 20680-030T-01
Cable Type: 30Pin Micro-Coaxial Harness
Cable specification: 40AWG ultra-fine coaxial cable
Line position definition: 1-N
When carrying out compatible alternative development, the following aspects should be focused on:
First, the connector's matchability, it is necessary to ensure that the connection size and pin definition are consistent.
Secondly, electrical performance needs to ensure that characteristic impedance, attenuation rate, and high-speed signal integrity meet system requirements.
Third, to ensure consistency, it is necessary to guarantee length control, shielding treatment, and termination quality during the mass production process.
Our company can provide:
I-PEX 82287-100B-02-D compatible cable harness solution
Through the manufacturing technology of professional ultra-fine coaxial cable assembly, achieve high-speed connection performance matching with the original application plan, and provide customers with a reliable alternative choice.

Professional ultra-fine coaxial cable assembly capability boosts high-speed connection upgrade
As electronic devices continuously develop towards high-speed, thin, and intelligent, the connection cables have become an important part of the system performance. The extremely thin coaxial cables with low attenuation, high shielding, and high stability can effectively solve the problems of loss, interference, and space constraints in the process of high-speed signal transmission.
Our company has the R&D and production capabilities for extremely thin coaxial cable assemblies, and can provide one-stop services around customer needs, including wire selection, connector matching, cable assembly processing, and performance optimization. For the application requirements of the I-PEX 82287-100B-02-D product, our company can provide high-reliability compatible alternative extremely thin coaxial cable assemblies to meet the needs of high-speed electronic equipment for stable connections and long-term reliable operation.
I-PEX 82287-100B-02-D is a 30Pin ultra-thin coaxial cable solution for high-speed, miniaturized device applications, using a 40AWG Micro-Coaxial structure. The配套 mating connector model is 20680-030T-01, and the wire assignment is defined as 1-N. This solution leverages the advantages of ultra-thin coaxial cable, such as low attenuation, low crosstalk, and high shielding, to achieve stable high-speed signal transmission. With the continuous development trend of high-speed electronic devices, ultra-thin coaxial cable will continue to be an important solution for internal connections of precision electronic products. I am【3W Electronic Components Network】Committed to the compatibility replacement and mass production support of ultra-fine coaxial cable assemblies and precision connectors for high-speed interfaces, for project consultation, please contact:Manager Zhang 18913228573 (WeChat same number)Our company can provide a compatible alternative cable harness solution for I-PEX 82287-100B-02-D, offering customers a high-performance, reliable, and stable solution for ultra-thin coaxial cable harnesses.