How to deal with common faults of board-to-board connectors?

I. Board to board connector common fault handling to how? Correct connection of board-to-board connector products can improve the service life of the product, to ensure the good operation of machinery and equipment. Board to board products failures, not dealt with in a timely manner, will bring incalculable economic losses.1. Board to board connector connection problems board to board plug and socket used to electrically connect the two boards separated from each other, it contains a connector with the board conductor and used as a series of the connector adapter connector, where the connector has a circuit board conductor terminals and can accommodate the terminals of the body. The adapter connector is provided with a second terminal and the body to accommodate the second terminal, the two extended ends of the second terminal can be separated from the terminal insertion to achieve with the connector set up in the two circuit boards electrically conductive, wherein one of the terminals and the second terminal has a reverse bending of the end of the elastic portion of the body and the second terminal according to the circuit board spacing setting standards and selecting the appropriate extension of the length of the board. 2.About Board-to-Board Connector TroubleshootingOnce a product fails, it can be determined that the cause is a broken wire in use, loose products, etc. The frequency of breakage in the middle of the wire is very high. Wire broken in the middle of the frequency is not much, mostly broken at the connector, so the focus of the inspection should be placed on the sensor and connect the wire at the Shun, to see if they have no loose and poor contact and other issues. Generally due to poor contact caused by the disconnection fault, mostly due to corrosion at the end of the product, external dirt into the terminal or connection socket, which in turn leads to reduced contact pressure. To cope with this kind of failure, you need to remove the connector, and then re-insert it to change its connection condition, so that it can restore normal contact.

-Second, on the international electronic products network platform related to the introduction and sales of products brief: international electronic products network - a professional agent / production / sales of a variety of {connectors | wiring harness | wire and cable products }; if you have a related [connectors | wiring harness | wire and cable products] purchasing / sourcing needs or would like to buy / to understand which connectors | wiring harness | wire and cable products we can provide solutions, please contact the Division I business personnel below; If you have related [connector | wire harness | wire and cable production] sales / resources and promotion needs, please click on the ¡¡ Business Cooperation ← ¡" to discuss with a person!