What is the identification method of low smoke halogen free flame retardant control wire and cable?

I. Low-smoke halogen-free flame retardant control wire and cable identification method is what?1, low-smoke halogen-free flame retardant control wire and cable identification method of product name identification method. Wire - low-smoke halogen-free flame-retardant polyethylene insulated wire and cable; cable - low-smoke halogen-free flame-retardant polyethylene insulated low-smoke halogen-free flame-retardant polyethylene sheathed power cables. Special products in general, the name will be a little different, such as polyethylene insulated low-smoke halogen-free sheathed flame retardant power cables, etc. 2, low-smoke halogen-free flame-retardant control wire and cable identification method of the skin burning method. With a soldering iron hot insulation layer should not be obvious depression, if there is a large depression is that the insulation layer of materials used or defective process. Or barbecue with a lighter, under normal circumstances should not be easy to ignite, after a long time to burn the cable insulation layer is still relatively intact, no smoke and irritating odor, while the diameter increased. If it is easy to ignite, it can be determined that the cable insulation layer does not use low-smoke halogen-free materials (most likely polyethylene or cross-linked polyethylene materials). If a smokier smoke appears, it is clear that a halogen-containing material was used for the insulation. If a long time after combustion, the insulation surface shedding serious, no significant increase in diameter, it is not suitable for irradiation crosslinking process. 3, low smoke halogen-free flame retardant control wire and cable identification method of hot water immersion method. The core or cable in 90 ℃ hot water immersion, under normal circumstances, the insulation resistance will not drop rapidly and remain above 0.1MΩ/Km. If the insulation resistance drops rapidly even below 0.009MΩ/Km, it means that there is no suitable irradiation crosslinking process. (Polyethylene or cross-linked polyethylene insulation materials do not apply to this method of identification, you can use the method of identification of the second article above). 4, low smoke halogen-free flame retardant control wire and cable identification method of density comparison method. Low-smoke halogen-free material density than water, you can peel off a small amount of insulation into the water, if floating above the surface of the water, it is certainly not low-smoke halogen-free material.

-Second, on the international electronic products network platform related to the introduction and sales of products brief: international electronic products network - a professional agent / production / sales of all kinds of {connectors | wiring harness | wire and cable products }; if you have a related [connectors | wiring harness | wire and cable products] purchasing / sourcing needs or would like to buy / to understand which connectors | wiring harness | wire and cable products we can provide solutions, please contact the following Division Division I business personnel; If you have related [connectors | wire harness | wire and cable products] sales / resources and promotion needs, please click on the "¡¡ Business Cooperation ←" with the person to discuss!