How should fiber optic patch cords be maintained and managed?

I. How should fiber optic patch cords be maintained and managed?1. Pay attention to the bending radius of fiber optic patch cords. Generally speaking, fiber optic patch cords with diameters of 1.6mm and 3.0mm can withstand a bending radius of not less than 3.5cm, while MPO fiber optic patch cords can withstand a bending radius of not less than 10 times their diameter.2. Don't pull or squeeze fiber optic patch cords. When installing fiber optic patch cords, excessive force may put pressure on the fiber optic patch cord and the connectors at its ends, thus affecting its performance. It is worth noting that if you need to use greater force to pull a fiber optic patch cord, then something may have gone wrong in the middle of it.3, route the patch cord according to the path of the fiber optic patch cord. If the length of the existing patch cord matches the current application, then you can reuse the patch cord. However, you still need to remove the patch cord from the fiber optic patch panel and reinstall the patch cord according to the new path. This is the way to ensure that the patch cord is not kinked, bent and stretched and squeezed. In order to effectively route the patch cords, you should find a suitable path for the patch cord between two ports, while avoiding the patch cords from tangling and crowding each other.4. Managing fiber optic patch cords by bundling or tying them can make the panel look neat, but bundling or tying fiber optic patch cords too tightly can increase the risk of over-crushing. To avoid this problem, you can properly give the fiber optic patch cord "loose", so that the fiber optic patch cord can move freely. 5, labeling is very necessary work, but also one of the important work of network system administrators. Any management point in the network cabling infrastructure (including wiring panels) correctly labeling is very necessary, so that network technology workers can accurately find out the beginning and end of the fiber optic cable. 6, check whether the fiber optic patch cord physical damage, including indentation and connector damage due to sudden bending of the sheath.

-Second, on the international electronic products network platform related to the introduction and sales of products brief: international electronic products network - a professional agent / production / sales of all kinds of {connectors | wiring harness | wire and cable products }; if you have a related [connectors | wiring harness | wire and cable products] purchasing / sourcing needs or would like to buy / to understand which connectors | wiring harness | wire and cable products we can provide solutions, please contact the following Division Division I business personnel; If you have related [connectors | wire harness | wire and cable products] sales / resources and promotion needs, please click on the "¡¡ Business Cooperation ←" with the person to discuss!