What are some of the ideas for storing energy storage power harnesses?

I. Energy storage power harness storage of the idea of what matters? Energy storage wiring harness in order to facilitate the installation, maintenance, to ensure that electrical equipment can work in A poor conditions, the whole car of the electrical equipment used in different specifications, different colors of wires through a reasonable arrangement, will be combined into one, and insulating materials to bundle the wires into a bundle, so that both complete and reliable. Energy storage connector car electrical equipment according to the size of the load current to choose the cross-sectional area of the wire used. Long working hours of electrical equipment can choose the actual capacity of 60% of the wire; short working hours of electrical equipment can be used to wire the actual capacity of 60% - A. PV storage connector wire harness use more than the use of the period of time, so that the aging of the wire, insulation rupture, a significant decline in mechanical strength, caused by short circuits between the wires, disconnections, ride on the iron, etc., resulting in the harness burned out. 1, as far as possible, avoid the way in the open air Storage of energy storage power harness. 2, energy storage power harness at lower temperatures (generally about 5 ° and a bit), can not be thrown or drop the wire, because it may lead to cracking of the insulating sheath of the problem. 3, energy storage power harness in the lifting and packaging is strictly prohibited several disks at the same time lifting, because of the energy storage power harness of the weight of a volume of light, so that the application of cardboard packaging to be well reinforced, and the terminal connecting line because the connector is a plastic part, should be Packing bags sealed and gently carry and put in vehicles, ships and other means of transportation storage, wire tray to be reinforced with appropriate methods to prevent each other from colliding or turned over to prevent mechanical damage to the wire. 4, be aware of the energy storage power harness is strictly prohibited with acids, alkalis and mineral oils, can not be stored in isolation from these aggressive substances, storage of wire storage shall not be damaged and erosion of metal in the warehouse of the presence of hazardous gases. 5, Energy storage power harness storage period, should be moved once on a regular basis, moving is, will be down to store the disk side rolled over towards the top, so as to avoid the bottom side of the moisture decay, and storage should often pay attention to the wire head is intact. 6, storage of energy storage power harness storage period should be limited to the factory period of the product, generally no more than one and a half years, A long no more than two years.

-Second, on the international electronic products network platform related to the introduction and sales of products brief: international electronic products network - a professional agent / production / sales of all kinds of {connectors | wiring harness | wire and cable products }; if you have a related [connectors | wiring harness | wire and cable products] purchasing / sourcing needs or would like to buy / to understand which connectors | wiring harness | wire and cable products we can provide solutions, please contact the following Division Division I business personnel; If you have related [connectors | wire harness | wire and cable products] sales / resources and promotion needs, please click on the "¡¡ Business Cooperation ←" with the person to discuss!