How are circular connectors produced?

I. How are circular connectors produced? Circular connectors are widely used, not only in the field of machinery manufacturing and industrial automation, but also in the field of information control technology, this is because it can help users to save a lot of installation time, reduce production costs, and improve the convenience of use.1. Impact products in the production of circular connectors, usually need to press the pins, the use of large high-speed punching presses for stamping, you can press the thin metal strip into pins. One end of a large roll of metal tape is transported to the front end of the punch press, as for the other end, it is necessary to pass through the hydraulic table of the punch press, winding pulley, and then the winding pulley pulls out the metal tape, rolled up, you can complete the production of pins.2. Electroplating connector pins need to be sent to the electroplating process stage immediately after the stamping, plating refers to the surface of the product plated with a variety of metal plating and the production of box-type parts at the stamping stage. Such as pin twisting, crushing or deformation, all need to be carried out in the moving knife plating equipment, although plating can make the product surface bright and improve the corrosion resistance of the product, but can be found on the surface after plating there are some defects, such as pinholes, scratches, etc., so some connector pin need to be plated with multiple layers of metal.

-Second, on the international electronic products network platform related to the introduction and sales of products brief: international electronic products network - a professional agent / production / sales of all kinds of {connectors | wiring harness | wire and cable products }; if you have a related [connectors | wiring harness | wire and cable products] purchasing / sourcing needs or would like to buy / to understand which connectors | wiring harness | wire and cable products we can provide solutions, please contact the following Division Division I business personnel; If you have related [connectors | wire harness | wire and cable products] sales / resources and promotion needs, please click on the "¡¡ Business Cooperation ←" with the person to discuss!