How do I wire a screw terminal block?

I. How to wire the screw terminal? First of all, remove the insulation skin of the wire 6 to 8mm, and then insert the exposed wire into the screw terminal; then use a screwdriver to tighten the screws at the top, and pull the hand a few times, to see if the wire will fall off; Finally, to determine that the wire is firmly connected to the terminal, and then press the switch, and then when the light is on, it means that the terminal wiring has been successful. Wiring Precautions: 1, wiring process, you must ensure that the power cut off before operation, not electrified operation. 2, power into the line, it must be firm, you can try to pull the hand; 3, such as encountering problems with the terminals, do not hold the "make do" attitude, to be replaced in a timely manner. Screw terminals application scenario: screw terminals are mainly used in lighting, communications, security and other industries, the requirements of this series of terminals in the compression line on the screw torque requirements are higher, the screw back to a higher distance to be greater than the larger compression line range, for the long digits of the terminal can not be warped deformation of the screw's corrosion resistance requirements are high.

-Second, on the international electronic products network platform related to the introduction and sales of products brief: international electronic products network - a professional agent / production / sales of all kinds of {connectors | wiring harness | wire and cable products }; if you have a related [connectors | wiring harness | wire and cable products] purchasing / sourcing needs or would like to buy / to understand which connectors | wiring harness | wire and cable products we can provide solutions, please contact the following Division Division I business personnel; If you have related [connectors | wire harness | wire and cable products] sales / resources and promotion needs, please click on the "¡¡ Business Cooperation ←" with the person to discuss!