What is the process of electronic wire harness processing?

1. cut wire: check the standard type of wire is not correct; scale is not in line with the needs; cut off the necessary flush, can not scratch the wire, wire without dirty and other conditions. 2. peeling skin: check the peeling mouth is not flush, can not be peeled core wire, grouping wire, etc., peeling scale is not correct. 3. grouping disposal: trimming scale is not correct, trimming is not flush, trimming grouping can not be injured when the core. 4. peeling inner skin: check the peeling mouth is not flush, peeling scale is not correct; there is no peeling core wire, broken copper wire; half-peel insulator can not fall. 5. peeling the inner skin: check the peeling mouth is not flush; there is no peeling core wire, broken copper wire; half-peel insulator can not fall. 6. 4. peeling inner skin: check the peeling mouth is not flush; peeling scale is not correct; there is no peeling injury to the core wire, broken copper wire; half-peeling insulator can not fall. 5. set of shortening tube: check the shortening tube scale, type is not correct. 6. ready to weld: check the temperature of the tin furnace is not the right; ready to weld before the core wire is not a good organization of the copper wire, is not there a forked, zig-zagging, folding and so on the phenomenon; ready to weld after Is not a copper wire fork, big head, copper wire is not uniform and scalding insulation skin and other phenomena. 7. Soldering: check the temperature of the soldering iron is not correct; can not be scalding the insulation skin, tin point should be lubricated, tin tip, not fake welding, false welding. 8. Terminal pressure: confirm that the terminals, wire standards are not correct; terminals pressed with a flared mouth, skewed, insulation skin and core wires are exposed is not too long or short. 9. Terminal piercing Check the connector, terminal type is not correct; terminal damage, deformation and other phenomena; terminal leakage, wrong insertion, piercing not in place and other phenomena. 10. line crimping: check the type of connector is not correct; the direction of the line is not correct; the core wire is not broken, exposed copper, burned; crimp is not in place. 11. blowing shortening tube: shorten the tube to shorten the shortening is not outstanding, can not be burned insulation skin. 12. assembling the shell: the shortening tube is not outstanding, can not burn the insulation skin. 12. assembling shell: shell is not installed wrong, there is no scratching, burrs and other bad, there is no leakage of parts, screws have screwed hair, oxidation, discoloration, loosening and other bad, assembled without conforming to the bad; such as the shell is a direction, then it must be assembled in accordance with the needs of the 13. labeling: check the labeling of the content is not correct, clear, no word breaks phenomenon; labeling is not the correct scale; labels are not Dirty, broken; labeling is not the correct orientation. 14. tie: check the standard, color, orientation is not correct; no cracking, loose phenomenon. 15. injection molding: check the mold is not dirty, molding parts are not missing material, bubbles, poor adhesion, hardening and so on. 16. plug molding: check the plug molding damage, unevenness, lack of material, burrs, Sundries, streamlines and other defects, recognize the metal terminals without deformation, damage, exposed copper and other defects. 17. electrical view: in accordance with the corresponding commodity view guide needs to be viewed. 18. appearance view: pay attention to as long as it can be seen all the items to be viewed.

-19, on the BBC Electronic Products Network platform related to the introduction and sales of products brief: BBC Electronic Products Network - a professional agent / production / sales of a variety of {connectors | wiring harness | wire and cable products }; if you have a related [connectors | wiring harness | wire and cable products] purchasing / sourcing needs or would like to buy / to understand which connectors | wiring harness | wire and cable product solutions that we can provide, please contact our Division below! Business personnel; If you have related [connectors | harness | wire and cable production] sales / resources and promotion needs, please click on the "→ Business Cooperation ←" and special people to discuss!