4 effects of high temperatures during the injection molding process for pin connectors

High-quality pin connectors are rigorously processed through a variety of processes, each pin connector will go through a process known as injection molding process, the injection molding process, the impact of temperature is the most important, the temperature of the high and low temperature will have a direct impact on the quality of the entire product, this article explains the pin connectors for the injection molding process when the temperature is too high, the four effects.

I. The impact of thermal deformation caused by mechanical needle connectors for injection molding process when the temperature is too high leading to thermal expansion coefficient of the hydraulic components in the different moving parts due to its fit gap becomes small and jam, causing action failure, affecting the transmission precision of the hydraulic system, resulting in poor quality of the work of the components and other factors. Second, the impact of deformation of rubber seals Shenzhen Zhenling Sunshine Technology experts in the row of needle connectors for injection molding process when the temperature is too high in the actual test found that the injection molding machine temperature is too high will make the rubber seals deformation, accelerate the aging failure, reduce the sealing performance and service life, and lead to leakage of the adverse consequences. Third, lead to accelerate the impact of oxidative deterioration of the oil row pin connector processing in the injection molding machine temperature is too high will accelerate the oxidative deterioration of the oil, precipitation of asphalt, reducing the service life of the hydraulic oil. Precipitated material blocking damping holes and slit valve ports, resulting in pressure valve jammed and can not be acted on, metal piping elongation and bending, and even rupture and other adverse consequences. Fourth, the impact of the viscosity of the oil to reduce the row of needle connector processing in the injection molding machine temperature is too high will lead to a reduction in the viscosity of the oil, leakage increases, the volumetric efficiency of the pump and the efficiency of the entire system will be significantly reduced. As the viscosity of the oil is reduced, the slide valve and other moving parts of the oil film becomes thin and cut through, the frictional resistance increases, resulting in increased wear and tear consequences.-5, on the BBC Electronic Products Network platform related to the introduction and sales of products brief: BBC Electronic Products Network - a professional agent / production / sales of a variety of {connectors | wiring harness | wire and cable products }; if you have a related [connectors | wiring harness | wire and cable products] purchasing / sourcing needs or would like to buy / to understand which connectors | wiring harness | wire and cable products we can provide solutions, please contact the following Division Division of our business staff! If you have related [connector | wire harness | wire and cable production] sales / resources and promotion needs, please click on the "¡¡ Business Cooperation ←" with the person to discuss!