en

Common faults in the process of terminal line row of wires

Categorization:Product Information       

Specializing in the sales of: Connectors | Wire Harness | Cable Products

Terminal wire is processed through a variety of processing procedures, in which the lineup process, the terminal line may appear some failure problems, then what are the failure problems? Terminal line row of common failures in the process?1. Terminal line cut off the length of the inconsistent cause of this situation may be the feeder wheel pressure is too tight or too loose, need to adjust the straightener, if it is the cut line kerf wear and tear need to be replaced with a new cutter.2. Terminal line peeling opening length is not the same as the roller wheel fine-tuning pieces to adjust the gap between the two wheels to the wire does not flatten and too loose slippery, cut peeling knife cut into can not be too shallow or deep, to use the depth of the cutter adjusting pieces to cut the cutter to the shallow or deep! To use the depth of the cutter to adjust the cutter to the appropriate position, in order not to injure the copper wire and can be smoothly shedding the rubber skin shall prevail. 3. pressed against the terminal line of the exposed copper wire unevenly you can check the gun-type swinging arm conduit is attached to the wire, check the terminal machine cutter and swinging arm conduit relative to the straight, check the terminal machine auxiliary pressure block is loose, check the distance between the terminal machine and the automated machine there is no change.

-4、About BBC Electronic Products Network platform related to the introduction and sales of products briefly: BBC Electronic Products Network - a professional agent / production / sales of a variety of {connectors | wiring harness | wire and cable products }; if you have a related [connectors | wiring harness | wire and cable products] procurement / purchasing needs or would like to buy / to understand which connectors | wiring harness | wire and cable product solutions that we can provide, please contact our Division below! Business personnel; If you have related [connectors | harness | wire and cable products] sales / resources and promotion needs, please click on the "→ Business Cooperation ←" and special people to discuss!