Board-to-Board Connector Pitch 0.5/0.8mm Performance Testing

High-quality, high-performance board-to-board connector manufacturing process, whether 0.5 pitch or 0.8 pitch board-to-board connector test link is essential, board-to-board connector related tests,, can make the board to board connectors have a more in-depth understanding of the 1. board-to-board connector work, the current generates heat in the contact point leads to temperature rise, so it is generally believed that the operating temperature should be equal to the ambient temperature and the temperature rise of the contact point sum, which specifies the higher temperature rise allowed under the rated operating current. 2. Ambient temperature and contact point temperature rise and the sum of the provisions of the board to board connectors in the rated operating current allowable higher temperature rise.2. Salt spray resistant connectors in the environment containing moisture and salt work, metal structural components, contact surface treatment layer may produce galvanic corrosion, will therefore affect the physical use of the board to board connectors and electrical performance.3. Resistant to moisture intrusion affects the connecting insulating properties, and Corrosion of metal parts. Constant damp heat test conditions for relative humidity 90% ~ 95%, temperature . +40 ± 20 ℃, the test time according to product specifications, alternating humidity and heat test is more stringent.4. Board-to-board connector troubleshooting When the board-to-board connector disconnection failure, may be due to the use of the wire broken, the connector is a poor contact, the connector terminal is loose and caused. Wire breakage in the middle of the fault is very rare, most of the connector at the disconnection, therefore, the inspection should focus on carefully check the sensor and connect the wire at the Shun, whether there is a loose and poor contact phenomenon. 5. poor contact caused by the board-to-board connector disconnection fault, often because of the connector end of the corrosion, outside the dirty into the terminals or connectors, resulting in a contact pressure. Reduce. At this time, the board to board connector should be removed, and then re-installed on the plug, to change its connection status, it can restore normal contact.-6, on the BBC Electronic Products Network platform related to the introduction and sales of products brief: BBC Electronic Products Network - a professional agent / production / sales of a variety of {connectors | wiring harness | wire and cable products }; if you have a related [connectors | wiring harness | wire and cable products] purchasing / sourcing needs or would like to buy / to understand what connectors | harness | wire and cable product solutions that we can provide, please contact our Division below! Business personnel; If you have related [connectors | harness | wire and cable products] sales / resources and promotion needs, please click on the "→ Business Cooperation ←" and special people to discuss!