Drag chain cable conductor the thinner the better?

The thinner the conductor of a drag chain cable, the better is a misdirection! The finer the conductor is, the softer the conductor becomes, and the harder the conductor and the rubber are. The same drag chain cable specifications, the same bending radius, the finer the copper wire is the more resistant to bending, but also the finer the softer. However, in the process of high-speed reciprocating motion, the larger the pulling and stretching must take into account the mechanical strength of the conductor. The more detailed the mechanical strength of the conductor, the worse it is easy in the movement process because of the mechanical strength is not enough and directly be pulled off. At the same time, the conductor is too thin, will produce cable winding phenomenon. Many manufacturers claim that the conductor is 0.08 or even 0.06, one-sided pursuit of fine conductor and can not extend the service life of the cable. Therefore, the conductor should be based on the size of the cross-section of the different, choose the appropriate conductor outer diameter matching rather than the pursuit of conductor the finer the better.-2、About BBC Electronic Products Network platform related to the introduction and sales of products briefly: BBC Electronic Products Network - a professional agent / production / sales of a variety of {connectors | wiring harness | wire and cable products }; if you have a related [connectors | wiring harness | wire and cable products] procurement / purchasing needs or would like to buy / to understand which connectors | wiring harness | wire and cable product solutions that we can provide, please contact our Division below! Business personnel; If you have related [connectors | harness | wire and cable products] sales / resources and promotion needs, please click on the "→ Business Cooperation ←" and special people to discuss!