What are the causes of terminal wire backout? What are the main areas of terminal wire defects?

Terminal decommissioning refers to the poor connection between electronic components and terminal wires, resulting in terminal wires coming loose or falling off. The reasons for terminal wire back out may include the following aspects: wire quality problems: the wire is made of poor material or poor quality, and is prone to deformation, aging, fracture and other problems, which can lead to wire loosening or detachment. Terminal quality problems: the manufacturing process and quality of the terminals is also one of the main reasons for the terminals to retreat. If the manufacturing process of the terminal is not rigorous or the quality is not good, it may lead to problems such as loosening and deformation inside the terminal, thus affecting the stability of the connection between the terminal and the wire. Environmental problems: environmental factors may also affect the connection stability of the terminal wire. For example, in high temperature, humidity or corrosive environment, the wire is easy to aging, deformation or rust, thus affecting the connection between the terminal and the wire. Design problems: If the equipment design is not reasonable, it may lead to the line is too complex, poor connection and other problems, thus increasing the risk of terminal line back wire. Operational problems: In the course of using the equipment, if the connection is not correct or used improperly, it can also increase the risk of terminal wire back-out. For example, problems such as loose or bent connecting wires and poor connections can affect the stability of the terminal wire connection. Terminal line defects may include the following aspects: line short circuit: line short circuit refers to the phenomenon that two or more nodes in the line are directly connected. Line short circuit may lead to equipment overload, malfunction and other problems, and in serious cases may cause fire and other safety accidents. Line open circuit: line open circuit refers to a node in the line with other nodes to lose the connection phenomenon. An open line may lead to equipment failure, signal interruption and other problems. Poor line contact: Poor line contact refers to the phenomenon that the line connection is loose, poor contact and other phenomena. Poor line contact may lead to equipment failure, signal instability and other problems. Line leakage: Line leakage refers to the phenomenon of current "leaking" into unintended paths in the line. Line leakage may lead to electric shock, fire and other safety accidents. Line impedance mismatch: Line impedance mismatch refers to the mismatch of the impedance of different parts of the line, which may lead to signal degradation.

-About BBC Electronic Products Network platform related to brief introduction and sales products: BBC Electronic Products Network - a professional agent / production / sales of a variety of {connectors | wiring harness | wire and cable products}; if you have a related [connectors | wiring harness | wire and cable products] procurement / purchasing needs or want to buy / to understand what we can provide connectors | wiring harness | wire and cable products solutions, please contact our business staff below; If you have related [connectors | wire harness | wire and cable products] sales / resources and promotion needs, please click on the "¡¡ Business Cooperation ←" with the person to discuss!