What are the issues to be aware of when using terminal connectors?

A terminal connector is actually a piece of metal that is sealed in an insulator with holes at each end where wires can be inserted, thus facilitating the connection of wires. In order to meet the connection and disconnection of a large number of wires, so the structure of the terminal connector is more complicated.

-I. What are the issues that need to be noted when using the terminal connector? 1. Do not disassemble the terminal connector under electric conditions. The terminal connector is not manufactured on the premise that it can be disassembled and assembled in an electrically charged circuit. Therefore, do not disassemble or install the "Connector for Terminal Board" under electric current, as this may cause danger due to sparks, etc., or may result in poor performance. 2. Anti-drip measures When the terminal connector is exposed to condensation or water, the insulation between the circuits may be poor. If condensation or water is likely to occur, take appropriate anti-dripping measures.3. When using the terminal connector in accordance with the rated value, do not energize multiple circuits by branching the current above the rated value. Even if the current of one circuit is calculated not to exceed the rated value, it may not be possible to distribute equal current to each circuit due to imbalance in the conductive path or contact resistance, which may lead to accelerated deterioration and abnormalities due to energization of more than the rated value. 4. Distinguish between two types of terminal connectors for internal wiring and for inter-equipment wiring, and the terminal connectors for internal wiring can only be used for the purposes specified in the Electrical Appliance and Material Safety Law. The terminal connector for intra-equipment wiring can only be used for "internal wiring of the main body of the equipment" as stipulated in the Electrical Appliance and Material Safety Law, and should be handled appropriately on the side of the equipment in order to avoid contact with the general public. 5, the use of the environment, please do not place the terminal connector and the process work in progress or processed products (wiring harnesses, etc.) in the environment of corrosive substances, corrosive gases, high temperatures, high humidity, and direct sunlight, or the terminal may corrode or the plastic shell may become corroded. Terminal corrosion or plastic shell insulation performance deterioration and so on, resulting in poor equipment operation, etc. 6, do not apply external forces Do not apply external forces to the terminal connectors and process in-process products or processed products (wiring harnesses, etc.), otherwise it will cause deformation and damage, resulting in poor performance of the connector. 7, can not be inserted into the inspection other than the parts of the circuit conductivity check or wiring inspection, do not insert the applicable connectors (seating plug.), the connector is not suitable for the inspection, Do not insert parts other than the applicable connectors (seated plugs, seated pins, and busbars, etc.) during circuit conduction or wiring inspections, as this may result in poor contact due to deformation of the terminals, etc. 8. Packaging and Storage Precautions When packaging and storing processed products, do not apply loads for a long period of time while stacked or otherwise, as this may result in poor performance due to the deformation of the terminal connector. Otherwise, it may cause poor performance due to deformation of "terminal connectors".

-Second, on the U.S. dollars electronic products network platform related to the introduction and sales of products brief: U.S. dollars electronic products network - a professional agent / production / sales of a variety of {connectors | wiring harness | wire and cable products }; if you have a related [connectors | wiring harness | wire and cable products] purchasing / sourcing needs or would like to buy / to understand what we can provide connectors | harness | wire and cable products solutions, please contact our business staff below; If you have related [connector | wire harness | wire and cable production] sales / resources and promotion needs, please click on the ¡¡ Business Cooperation ← ¡" to discuss with a person!