How to maintain board-to-board connectors on a daily basis?

I. Board to board connector daily how to maintain?1, in the board to board connector installation and operation process, must ensure that the board to board connector installation is firm and reliable, otherwise for the connector exists fixed unstable situation, are leading to the application of certain pins and jacks between the abnormal separation, leading to control system power transmission and signal control interruptions of the serious consequences.2, in general, the board to board connector end pins are One of its main core components, its role through the current or signal transmission to the contacts corresponding to its matching connector. So generally in the connector plug, pay attention to the action do not use too much force, otherwise the force is too large, easy to cause the connector internal end pin wear and tear, reduce service life. The second situation is likely to lead to the board to board connector end pin broken or damaged, then this is also due to the whole connector related to the situation that can not be used. 3, board to board connector is generally in the wiring, do not pull out the connector, because the connector in the process of operation, will be in the transmission of large currents between the connector, if you venture to open the connector, on the one hand, easy to cause the loss of data between the device Or interrupt the abnormal situation, such as in the connector's work process, it will be in the transmission of larger currents, if you take the risk of connecting the connector, it is easy to cause data loss between the equipment or interrupt the abnormal situation. 4, if the board-to-board connector use for a long time, you need to regularly on the connector routine maintenance, such as the connector surface and the end of the pin inside the connector will be the accumulation of some dust and debris, such as not dealt with in a timely manner, will affect the performance of the connector to use, but also very Connector performance is used, it is also easy to lead to failure. Next to check the connector is not damaged, once found also need to be replaced in a timely manner, so as not to cause great safety hazards in the use of 5, board-to-board connectors for the pull and pull out of the other side of the force of the interaction, it is easy to cause the connector within the metal sheet loss. That generally should be how to reduce the board-to-board connector plug wear and tear and other issues? So do not use the connector in daily life, do not connect the connector, followed by regular maintenance of the connector inside the end pin, if the use of a period of time, must be removed from the end pin, available some eraser to remove the surface attached to the dirt or debris, so as to effectively extend the life of the connector.

-Second, on the U.S. dollars electronic products network platform related to the introduction and sales of products brief: U.S. dollars electronic products network - a professional agent / production / sales of a variety of {connectors | wiring harness | wire and cable products }; if you have a related [connectors | wiring harness | wire and cable products] purchasing / sourcing needs or would like to buy / to understand what we can provide connectors | harness | wire and cable products solutions, please contact our business staff below; If you have related [connector | wire harness | wire and cable production] sales / resources and promotion needs, please click on the ¡¡ Business Cooperation ← ¡" to discuss with a person!