What to look for in an RJ45 connector inspection?

A RJ45 connector inspection to pay attention to what is the problem? 1, some waterproof wire RJ45 connector removed for inspection, should pay attention to carefully remove the seal, to avoid damage to the seal, and affect the waterproof function; installation, be sure to install the seal in place. Otherwise, perhaps due to water into the articulator and cause circuit problems. 2, when removing the network cable articulator, to carefully observe the articulator articulation method. The first thing to do in the case of loosening the locking reeds or press the buckle in order to dismantle the network articulator, do not force to pull apart. Installation, should be the opposite method of articulator inserted in the end and lock. 3, in the multimeter to view the RJ45 connector, the meter stick can not be inserted into the metal terminals too much force to avoid deformation and lead to poor contact. 4, the view of the RJ45 connector must be in the state of the power switch is closed, otherwise it will be due to a short-circuit current burned out of the relevant electrical components.

-Second, on the U.S. dollars electronic products network platform related to the introduction and sales of products brief: U.S. dollars electronic products network - professional agent / production / sales of a variety of {connectors | wiring harness | wire and cable products }; if you have a related [connectors | wiring harness | wire and cable products] purchasing / sourcing needs or would like to buy / to understand which connectors | wiring harness | wire and cable products we can provide solutions, please contact the following Division Division I business personnel; If you have related [connectors | wire harness | wire and cable products] sales / resources and promotion needs, please click on the "¡¡ Business Cooperation ←" with the person to discuss!