How about 6 common notes on Anderson connector assembly?

I. How about 6 common notes on Anderson connector assembly?1.Preparation of connectors and wiresPreparation of wires must be performed with care and diligence as it determines the overall efficiency and performance of the assembly, many manufacturers go wrong at this stage and select wrong wires which are cut and stripped at the end.2.Not following the assembly diagramsDon't follow the assembly drawings leads to a lot of possible problems in connecting wires in the chassis. Problems often occur when harness manufacturers connect wires incorrectly, which can cause the wire assembly to fail, which in turn can cause the entire system to fail. assembly drawings must be strictly followed to avoid such errors.3. Defects in CrimpingThe crimping process involves terminating the wiring harness in a wire harness. this is the most critical step in the wiring harness assembly, and if not performed correctly, can result in an open or shorted circuit. If many manufacturers perform this operation haphazardly, it can lead to product failures.4. Improper SolderingImproper soldering is another major area of manufacturer error, improperly soldering wires to terminals can lead to thermal damage, use the correct soldering equipment and the correct soldering temperatures when performing this operation.5. Missing Wires and Using the Wrong HardwareIn an effort to keep up with project schedules, some harness manufacturers may tend to overlook wires that are critical in the assembly. This can lead to failure of the harness assembly. In addition, the manufacturer may use the wrong hardware, including brackets, clamps, washers, or screws, to assemble the harness.6. Improper Wire ConnectionsThe final step in the harness assembly process is to bundle the wires using plastic strapping. Sometimes, harness manufacturers will wrap the package so tightly that it damages the wires. On the other hand, if it is loose, there is a risk that the bundle will not be held correctly, so the manufacturer must ensure that the ties are tightened around the wires in the correct manner.

-Second, on the U.S. dollars electronic products network platform related to the introduction and sales of products brief: U.S. dollars electronic products network - professional agent / production / sales of a variety of {connectors | wiring harness | wire and cable products }; if you have a related [connectors | wiring harness | wire and cable products] purchasing / sourcing needs or would like to buy / to understand which connectors | wiring harness | wire and cable products we can provide solutions, please contact the following Division Division I business personnel; If you have related [connectors | wire harness | wire and cable products] sales / resources and promotion needs, please click on the "¡¡ Business Cooperation ←" with the person to discuss!