How do you de-insulate flat cables?

ONE. How to strip insulation from flat cables? Stripping flat cable insulation requires specialized tools and techniques that are not necessary for stripping single conductor insulation. The common technique for stripping insulation (called cryogenic stripping) can be accomplished in several ways using different types of tools. One is the wire-parallel cryogenic stripping method. Two gumwood wheels are rotated in opposite directions to remove the insulation from both sides. The polishing action parallel to the wires creates friction which melts the insulation, and the insulation is then brushed off by the polishing brush. If the buffing wheels are spaced correctly, the insulation is removed in its entirety, leaving the wire clean. The advantage of this type of stripper is that it can be used to clean the middle portion of the cable. A method of removing flat cable insulation with a planer blade. The planer blade can be heated electrically, and when the blade is heated enough to melt the insulation, the insulation is scraped off by pressing the blade firmly against the flat cable and pulling the flat cable in the direction shown. The end of the stripped insulation can be cleaned by polishing or with a suitable solvent.

-Second, on the U.S. dollars electronic products network platform related to the introduction and sales of products brief: U.S. dollars electronic products network - professional agent / production / sales of a variety of {connectors | wiring harness | wire and cable products }; if you have a related [connectors | wiring harness | wire and cable products] purchasing / sourcing needs or would like to buy / to understand which connectors | wiring harness | wire and cable products we can provide solutions, please contact the following Division Division I business personnel; If you have related [connectors | wire harness | wire and cable products] sales / resources and promotion needs, please click on the "¡¡ Business Cooperation ←" with the person to discuss!