What is the test procedure for insertion and extraction strength of military aviation connectors?

I. How is the test procedure for the insertion and extraction force of military aviation connectors?1. Test purpose:To describe in detail the standard method of military aviation sockets and the insertion and extraction force required between its protective sleeve and the connector.2. Preparation before the test:① The samples consist of plugs and sockets that are accessible on one end, and the samples shall be matched. Unless otherwise specified. The sample shall consist of all available hardware, including rubber cores, terminals, iron shells, protective covers, screws or rails; ② auxiliary fixtures and inspection fixtures. 3. Test Methods:① Insertion force test. Put two aviation plugs that can be plugged into each other in the initial position of the mechanical insert, and the readings of the force gauge and torque meter are zero. Insert the connector (match) according to the progressive force ratio specified in the specification, and record the peak insertion force. (ii) Withdrawal force. Pull out the air plug that has been inserted in the opposite direction with progressively increasing force according to the instructions in the manual and record the pull-out force.4. Precautions:① During the test, the dial of the tensiometer should be placed in the proper position on the connector so that the reading pointer is in the center of the meter, and the operating meter can be up to 2%. ② Unless otherwise stated in the manual, the sample does not require any lubrication or cleaning methods.

-Second, on the U.S. dollars electronic products network platform related to the introduction and sales of products brief: U.S. dollars electronic products network - professional agent / production / sales of a variety of {connectors | wiring harness | wire and cable products }; if you have a related [connectors | wiring harness | wire and cable products] purchasing / sourcing needs or would like to buy / to understand which connectors | wiring harness | wire and cable products we can provide solutions, please contact the following Division Division I business personnel; If you have related [connectors | wire harness | wire and cable products] sales / resources and promotion needs, please click on the "¡¡ Business Cooperation ←" with the person to discuss!