How is the process of aviation plug connectors?

I. How is the process of aviation plug connector? Aviation plugs start from stamping pins, processed by large high-speed stamping machine, military aviation plugs (pins) are made of thin metal strip stamping. One end of the large roll of metal tape is fed into the front of the press, the other end passes through the hydraulic table of the press and is wrapped into the winding wheel, which pulls out the metal tape and rolls it up to stamp out the finished product. Aviation plug pin stamping is completed that should be sent to the electroplating section, in this stage, the military aviation plug electronic contact surface will be plated with a variety of metal coatings, electronic aviation plug manufacturers hope that the inspection system to detect the aviation plug pin plating surface of a variety of inconsistent defects, such as small scratches and pinholes. Typically, the plastic cartridge holders for military aviation plugs are made during the injection molding stage. The usual process involves injecting molten plastic into a metal tire film, which is then rapidly cooled and molded. The final stage is usually the electroplated pins are connected to the injection-molded box seat, either individually or in combination. Individual pairs of insertion refers to the insertion of one pin at a time, while the combination of pairs of insertion at a time will be more than one pin at the same time with the box seat insertion. Regardless of the mating method, military aviation plug manufacturers require that all pins be tested for defects and correct positioning during the assembly phase.

-Second, on the U.S. dollars electronic products network platform related to the introduction and sales of products brief: U.S. dollars electronic products network - professional agent / production / sales of a variety of {connectors | wiring harness | wire and cable products }; if you have a related [connectors | wiring harness | wire and cable products] purchasing / sourcing needs or would like to buy / to understand which connectors | wiring harness | wire and cable products we can provide solutions, please contact the following Division Division I business personnel; If you have related [connectors | wire harness | wire and cable products] sales / resources and promotion needs, please click on the "¡¡ Business Cooperation ←" with the person to discuss!