What are the precautions to be taken when terminating electrical connectors?

I. Introduction of precautions for electrical connector termination? Electrical connector termination, the manipulator should be strictly in accordance with the termination form of termination specifications or requirements for termination and inspection, and according to the corresponding contact serial number termination. The thickness of the insulation layer between the selected cable wires should be matched with the spacing of the contacts, the military circular electrical connector cable core should be matched with the contact terminals, when spanning and paralleling between the contacts, the diameter of the multi-stranded wire core stranded should be considered, and it is prohibited to span and paralleling between the contact crimp holes for processing. Welding should be based on the diameter of the bare wire to select the appropriate power of the soldering iron, each military circular electrical connector welding time is generally no more than 5s, should pay attention to the flux can not penetrate the insulator so as not to cause a decline in the insulation resistance of the product. When the military circular electrical connector crimping method should be noted that only when the connector contacts, wires, crimping tools and crimping program is accurate and controlled to ensure crimping quality. Before clamping the harness, the tail attachment should be screwed to the end, otherwise it is easy to damage the threads of the shell and the tail attachment during use. When connecting the tail attachment with anti-rotation device (anti-rotation key, etc.), the tail attachment and the anti-rotation device on the plug or socket should be aligned, otherwise the anti-rotation and other functions will be lost, and the electrical connector and the tail attachment may be damaged. When securing the cable, tighten the screws on one side of the cable clamp of the military circular electrical connector so that the cable clamp is pressed against the tail attachment, and then tighten the screws on the other side to clamp the cable.

-Second, on the U.S. dollars electronic products network platform related to the introduction and sales of products brief: U.S. dollars electronic products network - professional agent / production / sales of a variety of {connectors | wiring harness | wire and cable products }; if you have a related [connectors | wiring harness | wire and cable products] purchasing / sourcing needs or would like to buy / to understand which connectors | wiring harness | wire and cable products we can provide solutions, please contact the following Division Division I business personnel; If you have related [connectors | wire harness | wire and cable products] sales / resources and promotion needs, please click on the "¡¡ Business Cooperation ←" with the person to discuss!