A few notes on automotive wiring harness assembly

1. Do not pull the harness too tightly during assembly (especially in the horizontal arrangement of the harness), to avoid driving the vehicle in a bumpy state, causing the position of the harness fixing points to move incorrectly, resulting in an instantaneous increase in the distance between the two fixing points, which will lengthen the harness, causing the harness to pull off the internal joints/virtual joints, changes in the wire parameters, or even pull off the wires. 2. After the assembly of the wiring harness, there should be enough clearance around the passage to ensure that the wiring harness is not pressed by other parts, tripped by other parts and their fasteners. 3. The wiring harness should be assembled with enough clearance around it to ensure that it is not pressed by other parts, or tripped by other parts and their fasteners. Avoid wiring harness insulation being pinched off, worn or ruptured to cause grounding and other faults. 3. Do not arrange the same type and color of the plug. Avoid misplugging during assembly, which may damage the wiring harness and electrical appliances. 4. Arrange the plugs and connectors in a location where they can be easily detected and handled by hands and tools. To facilitate inspection and maintenance, the length of the wires of electrical components must be considered in accordance with the actual assembly conditions. If the electrical components are installed in the surface of the easy to operate position, you can omit the wires directly connect the plug to the components; if the electrical components are installed in a more hidden position, and later maintenance and dismantling is difficult, according to the need to increase the length of the wires of the electrical components, so that the plug is arranged in a position that is easy to check and maintain. In the actual operation process, we in addition to these five points of attention to the harness assembly work, but also to continue to find problems, and study more ways to solve the potential pitfalls in the assembly of the wiring harness.-2、About Evergrande Electronic Products Network platform related to the introduction and sales of products briefly: Evergrande Electronic Products Network - a professional agent / production / sales of a variety of {connectors | wiring harness | wire and cable products}; if you have a related [connectors | wiring harness | wire and cable products] purchasing / sourcing needs or would like to buy / to understand what connectors | harness | wire and cable products we can provide solutions, please contact the following Division I business personnel; If you have related [connector | wire harness | wire and cable production] sales / resources and promotion needs, please click on the ¡¡ Business Cooperation ← ¡" to discuss with a person!