Problems with poor insulation in aviation plugs/connectors

A, aviation plug / connector insulation layer is not good problem, the national standard aviation plug application process, insulation layer is not good problem may be caused by the following reasons: 1. conductors and insulators on the surface or inside may be unnecessary metal materials; 2. connector surface is full of floating dust, flux and other airborne pollutants; 3. organic chemical raw materials and hazardous gases adsorption of soluble materials and the surface of the adsorption of the film and the contraction of the water combined with the generation of ionization Conductive safety channel; 4. Connector moisture, mold, insulation layer material embrittlement. These factors, may lead to aviation plug characteristics are not smooth, triggering short-circuit faults, go power, thermal breakdown, grounding resistance inferior safety hazards, connector insecurity elements increased. Encountered the fault must immediately terminate the work to find the cause of connector insulation failure.

-Second, aviation plug insulation layer failure can be used in the following solutions: 1. If the insulation layer material is not qualified, immediately replace the new; 2. If the wrong operation or maintenance is caused by poor, then the application and safeguards should be upgraded; 3. If it is caused by environmental hazards, such as: in the application of wet and cold corrosive natural environments, we must do a good job of safeguards in order to prevent unnecessary damage. Aviation plugs/connectors are not well fixed. Aviation plugs are not well fixed, which may lead to a momentary power shutdown, or cause abnormalities in the equipment, so that the automatic control system electromagnetic energy transmission and data signals are terminated. Changing the mounting method can generally prevent this problem. Connectors should be installed in strict implementation of the operating procedures to maintain the tightness of the connector and equipment. Poor selection of molding process, incorrect material selection, poor quality of abrasives and assembly line process and other factors can also lead to poor fixing of aviation plugs.-3、About Evergrande Electronic Products Network platform related to the introduction and sales of products briefly: Evergrande Electronic Products Network - a professional agent / production / sales of a variety of {connectors | wiring harness | wire and cable products }; if you have a related [connectors | wiring harness | wire and cable products] purchasing / sourcing needs or would like to buy / to understand what connectors | harness | wire and cable products we can provide solutions, please contact the following Division I business personnel; If you have related [connectors | wire harness | wire and cable products] sales / resources and promotion needs, please click on the "¡¡ Business Cooperation ←" with the person to discuss!