Prevent cable ignition by sealing, plugging, coating and wrapping.

Fireproof coating has a thin coating, does not affect the normal heat dissipation, at the same time can play a good heat insulation and flame retardant effect and so on, but there are also many defects. Including improper selection of fireproof coating varieties, the market in the actual application of fake and shoddy products in the use of poor results, spray spit material will be the surface of the existence of peeling, uneven coating thickness, jerry phenomenon, and so on. Cable engineering fireproofing coatings used mainly solvent-based, solvent-based solvent toxicity, price, transportation safety and environmental pollution and other aspects of the problem, cold, water, oil and other applications is not ideal. In particular, the bending resistance is not good, the coating cured flexure is also poor, only for fixed erection of the cable, the coating is easy to dry peeling. Therefore, the cable should not be a large number of fire retardant way of applying fire retardant coatings, and should be used in a large number of sealing, plugging, isolation method, should pay attention to the following issues: sealing, plugging, isolation method, to be able to ensure that a single cable fire does not extend the ignition of multiple cables. Cable into the cable trench, cable tunnels, cable boxes, cable mezzanine orifice should be tightly fire blocking to prevent a single cable or a small number of cables on fire and ignite a large number of cables. Cable trench, cable tunnel every 60 ~ 100m to set up a fire wall and fire doors, shafts in the layered fire partition, power cables and control cables should be set between the fire partition, etc., control cables should be fully fire treatment or the use of fire-retardant cables in order to ensure that in any emergency the main equipment can be safely stopped.-2、About Evergrande Electronic Products Network platform related to the introduction and sales of products briefly: Evergrande Electronic Products Network - a professional agent / production / sales of a variety of {connectors | wiring harness | wire and cable products }; if you have a related [connectors | wiring harness | wire and cable products] purchasing / sourcing needs or would like to buy / to understand what connectors | harness | wire and cable products we can provide solutions, please contact the following Division I business personnel; If you have related [connectors | wire harness | wire and cable products] sales / resources and promotion needs, please click on the "¡¡ Business Cooperation ←" with the person to discuss!