Selection of type- c connectors in different environments

The type-c connector makes it easy to add devices to a computer without taking up the computer's parallel and serial ports. The device can be used as long as it is plugged in, but sometimes it is difficult to use. Now let's take a look at what to do when the type-C connector encounters a special environment.1. High-temperature environment: The metal and insulating materials of the type-C connector determine the operating ambient temperature of the connector. High temperature will destroy the flange material, reduce insulation resistance and voltage resistance; for metal, high temperature will make the contact vice lose elasticity, accelerate oxidation, resulting in plating deterioration. 2. humid environment: relative humidity higher than 80% is the main cause of electrical breakdown. Humid environment will lead to the absorption and diffusion of water vapor on the surface of the insulator, which can easily reduce the insulation resistance to MΩ Long-term high humidity environment will cause physical deformation, decomposition, product escape, respiration, electrolysis, corrosion and cracking.3. Temperature change environment: Humidity sudden change test is to simulate the type-c connector is actually used in cold environment to the warmer environment, or to simulate spacecraft and detector rapid changes in ambient temperature. Sudden changes in temperature may result in cracks or delamination of the insulation.4. Thin environment""When the air is thin, the plastic will release gases to contaminate the contact pairs, increasing the tendency for corona to be generated, decreasing voltage resistance, and leading to circuit short-circuit failures. When a certain value is reached at high altitude, the performance of the plastic deteriorates. Therefore, the use of unsealed connectors at high altitude must be derated. 5. corrosive environment: type-c connectors are suitable for different corrosive environments, and the selection of the corresponding metal, plastic and coating structure of the connector, such as salt spray environment. If there is no anti-corrosive metal surface, the performance will deteriorate rapidly. Silver-plated connectors are not suitable for use in environments with high SO2 concentrations. Mold is also a significant problem in hot and humid areas.-6, on the Evergrande electronic products network platform related to the introduction and sales of products briefly: Evergrande electronic products network - a professional agent / production / sales of all kinds of {connectors | wiring harness | wire and cable products }; if you have a related [connectors | wiring harness | wire and cable products] procurement / purchasing needs or would like to buy / to understand which connectors | harness | wire and cable products we can provide solutions, please contact the following Division I business personnel; If you have related [connectors | wire harness | wire and cable products] sales / resources and promotion needs, please click on the "¡¡ Business Cooperation ←" with the person to discuss!