How can connectors reduce pin wear?

How can connectors minimize pin wear? When connecting a connector, the pins will open only with a lot of force, but when separating them, it is easier. Therefore, it is judged that the connection of the electrical connector is stronger than the separation. Therefore, the interaction of the two forces of insertion and removal can easily lead to connector wear. If you want to reduce the wear and tear, you can look at the following good methods: you can improve the strength of the contact surface of the gold plating layer, which can effectively reduce friction. The contact surface can be nickel-plated and then gold-plated, so that the friction than in the direct copper plating on the gold will be a little smaller.1. The thicker the nickel layer, the gold-plated layer of wear resistance is stronger.2. The smoother the surface, that is, the roughness is low, so the friction will be very small.3. In the ordinary way should be transported to the connector, we should pay attention to the connector's maintenance to reduce the man-made damage to the electrical connector.

-4、About Evergrande Electronic Products Network platform related to the introduction and sales of products briefly: Evergrande Electronic Products Network - a professional agent / production / sales of a variety of {connectors | wiring harness | wire and cable products }; if you have a related [connectors | wiring harness | wire and cable products] purchasing / sourcing needs or would like to buy / to understand what connectors | harness | wire and cable products we can provide solutions, please contact the following Division I business personnel; If you have related [connectors | wire harness | wire and cable products] sales / resources and promotion needs, please click on the "¡¡ Business Cooperation ←" with the person to discuss!