Precautions regarding the transportation and storage of flat cables

1. Wire and cable storage time is longer then the need for appropriate cable tray rolling, rolling cycle for about three months, the specific time can be set according to the situation. Wire and cable in the rolling process should pay attention to the downward side of the disk stored in the rolling to the top, so that you can avoid a certain part of the disk is located in the bottom for a long time and moisture decay. 2. wire and cable is also a product with a shelf life, generally speaking, wire and cable is better to be used within the shelf life, if it has passed the shelf life should not be more than one and a half years, the longest time can not exceed the shelf life of two years. Wire and cable in the storage process should always check whether the head of the wire and cable intact. 3. Wire and cable insulation jacket and protective cover are mostly rubber products, can not withstand excessive exposure to sunlight, so try to avoid wire and cable is prevented in the open air, traveling flat cable cable tray is not allowed to be placed flat. 4. Wire and cable in the process of transportation should be avoided to fall from a high place of the phenomenon, and more prohibited during loading and unloading from the Throw down the wire and cable, especially in the lower temperature conditions, wire and cable insulation sleeve, protective sleeve is more brittle, hard, high altitude fall will lead to insulation sleeve and protective sleeve cracking. 5. wire and cable in the packaging, can not appear a few cable trays at the same time lifting, in order to avoid the occurrence of dangerous accidents. Cable tray in the means of transportation such as vehicles, ships must be placed reasonably and be fixed to prevent in transit because of shaking and other reasons resulting in the cable tray over to or collision, damage to the wire and cable. 6. Wire and cable corrosion resistance is generally very poor, is strictly prohibited and acid, alkali, mineral oil substances in contact, if the transportation process has to be placed in close proximity to corrosive substances, it is necessary to carry out the necessary isolation. Wire and cable storage warehouse must be prohibited to destroy the wire and cable insulation layer of substances and the presence of corrosive gases.-7, on Evergrande Electronic Products Network platform related to the introduction and sales of products briefly: Evergrande Electronic Products Network - a professional agent / production / sales of a variety of {connectors | wiring harness | wire and cable products }; if you have a related [connectors | wiring harness | wire and cable products] purchasing / sourcing needs or would like to buy / to understand which connectors | harness | wire and cable products we can provide solutions, please contact the following Division I business personnel; If you have related [connectors | wire harness | wire and cable products] sales / resources and promotion needs, please click on the "¡¡ Business Cooperation ←" with the person to discuss!