How to test the quality of RF coaxial connectors

1. During the processing of RF coaxial connector products, the through stop gauge of the product threads will be controlled. Many companies do not control this through-hole gauge. It doesn't matter if it's a through-hole gauge, as long as it matches the male and female. This is not the case! Failure to control the through-hole gauge will affect the life of the product. Some products need to be transported back and forth and vibrated. If you can not control the stop gauge, it may be poor contact. 2. RF coaxial connector product plating process of salt spray control is also very important. The conventional plating requirement for each product manufactured by LISHEN Electronics can be met for more than 48 hours to ensure that the product will not oxidize and corrode during use, resulting in product failure; 3. When assembling the RF coaxial connectors, LISHEN Electronics will check all the assembled dimensions to ensure that each dimension is within the range of effective control, which makes the connectors that we produce have very good performance stability.

-4、About Evergrande Electronic Products Network platform related to the introduction and sales of products briefly: Evergrande Electronic Products Network - a professional agent / production / sales of a variety of {connectors | wiring harness | wire and cable products }; if you have a related [connectors | wiring harness | wire and cable products] purchasing / sourcing needs or would like to buy / to understand what connectors | harness | wire and cable products we can provide solutions, please contact the following Division I business personnel; If you have related [connectors | wire harness | wire and cable products] sales / resources and promotion needs, please click on the "¡¡ Business Cooperation ←" with the person to discuss!