Terminal Harness Production Inspection Standards_Repeat

What is a Terminal Harness? Terminal harness is a wire harness with connectors, and wire welding to achieve a relatively long connection distance, we call this end or several ends of the wire with connectors terminal harness. The types of terminal harnesses are divided into a variety of categories, such as security monitoring class aviation head line, waterproof line, car terminal line GPS multi-functional power line, DVD power signal line, etc., in-flight connection line O-type terminal line, Dupont 2.0 and so on. Terminal harness raw materials are mainly tubular terminals, disc terminals, pin terminals, plug terminals, etc., Huachen Yu terminal harness raw materials are imported terminals, the price is a little higher than the ordinary terminals, but the quality is guaranteed, the following have Huachen Yu for you to introduce the production of terminal harnesses as well as inspection standards.

Wire harness production production process is as follows: 1: task issued 2: prepare tools 3: production is complete 4: wear heat-shrink number tube 5: insert waterproof plug 6: crimp terminal 7: wear waterproof plug 8: stripping, wear heat-shrinkable sheath 9: inspection 10: packaging terminal consists of three parts: plugging area, transition area and crimping area, the plugging area is the terminal and the other half of the connecting terminal plugged in the part of the part of the part that has a designer design for and the This part is designed by designers to be combined with the butt end, if the crimping process deformation of the joint, it will reduce the performance of the connector. The transition zone is also designed to be unaffected during the crimping process, and can also affect the performance of the connector if the position of the elastic tabs or terminal ports is changed. The crimp zone is designed to be affected by the crimping process, use the connector manufacturer's recommended termination equipment to clamp the crimp zone. It can be firmly connected to the wire. Harness inspection generally first from the front and then to the back, from the front section to the back end, and then from the top to the end, observe whether the cable insulation is intact, there are no scratches, damage and bare wire, check the terminal shrapnel there is no deformation of the exposed copper, etc., and secondly, check whether the conductor is in line with the specification requirements, conductor copper cladding there is no wire, check the shape of riveted pressure and riveted shape as well as the front of the terminal side of the tail is not deformed, the material is not overly long band! And so on.

2, on the federal electronic products network platform related to the introduction and sales of products brief: federal electronic products network - a professional agent / production / sales of all kinds of [connectors | wiring harness | wire and cable products]; if you have a related [connectors | wiring harness | wire and cable products] purchasing / sourcing needs or would like to buy / to understand which connectors | wiring harness | wire and cable products we can provide solutions, please contact our business staff below; If you have related [connectors | wire harness | wire and cable products] sales / resources and promotion needs, please click on the "¡¡ Business Cooperation ←" to discuss with a person!