Industrial connectors: Why use industrial connectors?

Traditional connectors are easily damaged by wind, rain and sunlight outdoors. Damage to the housing exposes the interior to the outside world, causing a lot of insecurity and a much lower utilization rate. If it needs to be repaired or replaced, the maintenance cost is also a huge figure. Therefore, in order to make up for the insufficiency of the traditional connectors to meet the current needs, industrial connectors came into being. According to different environments, we can categorize industrial connectors into many different specifications, which can be very good to protect the safety of the power system in outdoor and even some harsh environments. What we want to summarize today is why we use industrial connectors. Users who have been exposed to the industrial connector industry know that it is a completely different product from ordinary connectors. Industrial connectors seem to solve many problems that ordinary connectors cannot solve. Let's take an example. When we are at home, the normal use of the connector is not protected. When we were young, our family told us never to touch any plugs and sockets with unwashed hands. However, industrial connectors can be used outdoors and are resistant to wind and rain, and depending on the level of protection can be completely immersed in water.

The purpose of industrial connectors is to connect Ethernet in harsh environments. Industrial connectors have many advantages such as toughness and good resistance. And the industrial connector is not a single outdoor and harsh environment, it is also good to choose it in some manufacturing industries. The reason why the industrial connector has the function of waterproof light is that the plug of the industrial connector has a nut on the outside, and the nut can be engaged with the socket shell after unscrewing, so that the engagement is very tight, and it can be very good resistance to the external moisture and water vapor. And the plug to socket position can prevent damage caused by the pin. The shell of the industrial connector is also made of defensive materials, mainly to adapt to many different environments. Industrial connectors are well protected for power and data transmission in a variety of environments. When considering the need to choose an industrial connector, you need to consider whether the environment of use is likely to be exposed to sunlight, rain, wind, and especially rain, water vapor and water spray. As we all know, electricity and water contact can cause very serious consequences, so in the use of the environment if there is such a situation to use industrial connectors. In addition, considering the power current used, the rated current of industrial connectors can be divided into 16A and 32A, etc.. It is right to choose according to the requirements. This is an overview of why people use industrial connectors and when they need to use them. I hope you will have a better understanding after reading this. If you have any questions, you can consult us.

2, on the federal electronic products network platform related to the introduction and sales of products brief: federal electronic products network - a professional agent / production / sales of all kinds of [connectors | wiring harness | wire and cable products]; if you have a related [connectors | wiring harness | wire and cable products] purchasing / sourcing needs or would like to buy / to understand which connectors | wiring harness | wire and cable products we can provide solutions, please contact our business staff below; If you have related [connectors | wire harness | wire and cable products] sales / resources and promotion needs, please click on the "¡¡ Business Cooperation ←" to discuss with a person!