Engineers to teach you how to test the plugging force of electronic connectors

Even if you are not in the component industry, you must have heard of electronic connector related products. Talking about electronic connectors, as an electronic engineer, will certainly recall the connector product insertion and removal force test link. So how much do you know about the electronic connector insertion and removal force test knowledge, the following Huicheng yuan connector company engineers to teach you how to test the insertion and removal force of the electronic connector, I hope that after you read the article content can be practiced, it is always good to learn to use.

On the issue of how to test the insertion and removal force of electronic connectors, Huicheng yuan connector company engineers will be from the insertion and removal force test, purpose, sample preparation, test methods, details of the description, reference documents six aspects to be elaborated in detail, are as follows: First, insertion and removal force test two, the purpose of: the purpose of this test is to introduce a decision on the electronic connector or its protective cover the required insertion and removal force of the standardized method. Third, the sample preparation test sample consists of a plug and an accessible end socket. Unless otherwise specified, the sample shall consist of all available hardware including edges, covers, wire clips, screws, guides, or sockets. Unless otherwise stated in the specifications, the sample does not require any method of lubrication or cleaning. 四、Test Methods1、Testing InstrumentsTesting instruments shall consist of 1.1 A mounting fixture that allows the sample to be mounted in a normal manner.1.2 A force gauge or toe gauge shall be placed in the proper position on the connector during the test to allow for the reading pointer to be located in the middle of the gauge so that the operating gauge can be operated up to the nearest 2%.1.3 Ancillary measuring instruments shall be mated to the test specimen and accompanied by the force gauge and torque gauge (axial pressure, etc.), as required.2 Test procedure 2.1 Unless otherwise specified, the sample shall be installed as normal. 2.2 Insertion force 2.2.1 Place the two mating electronic connectors in the initial position of the mechanical assembly, and well and force gauge and force meter readings to zero. 2.2.2 According to the specifications in the rate of the force will be completely and fully inserted into the connector (mating), well a record of the peak insertion force. 2.2.3 Withdrawal force According to the specifications in the rate of force will be completely and fully inserted into the connector (mating), well a record of peak insertion force. 2.2.3 Withdrawal force according to the specifications in the stated force rate to fully pull out the connector, and record the peak pull-out force. V. Description of the details of the test according to the specifications, the following details will be described: (a) the number of samples to be tested; (b) insertion force and withdrawal force; (c) insertion and withdrawal rate; (d) a possible insertion depth. Sixth, the reference document data form includes: (a) the title of the test; (b) a description of the sample including the installation 1. with (c) the test instrument used: (d) the test procedure; (e) evaluation and observation; (f) the date of the test and the name of the operator. On the electronic connector plugging force how to test the knowledge is introduced so much, understand the electronic connector test method, you can carry out the actual operation, consolidate the knowledge of the memory point. Huicheng yuan connector company, is a professional connector manufacturers, to provide each connector products are from the original factory direct, through the ISO certification, in line with international environmental requirements, and commitment to each customer to enjoy free warranty service within one year.

2, on the federal electronic products network platform related to the introduction and sales of products brief: federal electronic products network - a professional agent / production / sales of all kinds of [connectors | wiring harness | wire and cable products]; if you have a related [connectors | wiring harness | wire and cable products] purchasing / sourcing needs or would like to buy / to understand which connectors | wiring harness | wire and cable products we can provide solutions, please contact our business staff below; If you have related [connectors | harness | wire and cable products] sales / resources and promotion needs, please click on the ¡¡ Business Cooperation ← ¡" and specialists to discuss!