en

Procurement of wiring harness is not as simple as imagined, wiring harness manufacturers tell you never lose out!

Categorization:Product Information       

Specializing in the sales of: Connectors | Wire Harness | Cable Products

With the arrival of the intelligent era, there are more and more electronic products, and the demand for electronic components is also increasing. But as long as it involves electronic products, it is certainly inseparable from the wire harness, and for the procurement of this material, in fact, many enterprises are different. According to the current market research data, many enterprises are direct bulk purchases, but this also raises the question that the raw materials are too much to use.1. Pay attention to the cross-section area of the wire when different electrical equipment using the line cross-section area is completely different, some equipment has a long working time, then you need to use 60% of the load flow line, if it is a short-circuit device, as long as the use of more than 60% of the load flow line, no more than will suffice. Be sure to pay attention to this issue, otherwise it may lead to the equipment can not be used normally. 2. whether easy to damage In general, the wire harness is not easy to damage, the quality is also better, but some of the materials are of poor quality, subject to extrusion, it is very easy to cause damage to the insulation layer, which in turn causes a short-circuit of the wire. Therefore, when purchasing, first understand the qualification of the product, make sure that each material has been strictly tested, so that you can avoid losses. Otherwise, the short circuit is not but the material damage is so simple, may also cause damage to electrical appliances.3. Positive and negative is correct this issue is very important, in general, positive and negative will not have a problem, but the production process, due to improper operation of the workers, there may be a positive and negative reverse the situation. Therefore, when buying this material, you need to check whether the positive and negative poles are accurate. Considering the wiring harness comprehensively this thing is not simple, must be carefully checked to avoid problems.

2, on the federal electronic products network platform related to the introduction and sales of products brief: federal electronic products network - a professional agent / production / sales of all kinds of [connectors | wiring harness | wire and cable products]; if you have a related [connectors | wiring harness | wire and cable products] purchasing / sourcing needs or would like to buy / to understand which connectors | wiring harness | wire and cable products we can provide solutions, please contact our business staff below; If you have related [connectors | harness | wire and cable products] sales / resources and promotion needs, please click on the ¡¡ Business Cooperation ← ¡" and specialists to discuss!