What factors affect the life of a connector jack? What is the proper way to use a connector?

Circular connectors are used in a more complex environment, in order to ensure that in different environmental conditions, performance is still stable, the adaptability of the environment requires a higher. However, even if the circular connector environmental adaptability, but in the long-term use of the process, the impact of environmental factors on the circular connector can not be ignored, especially the jack part is more vulnerable to humidity, temperature, vibration and other environmental factors, and shorten its service life.　　1, humidity: when the environment is too humid, then water and metal parts since this year to produce corrosion, electronic socket insulation decreases, conductivity increases. The greater the humidity in the environment, the month will affect the service life of the circular connector jack. Therefore, today there are also many products in the production of the use of materials less affected by water.　　2, temperature: different seasons, the temperature is different, especially in the summer, the high ambient temperature, coupled with the presence of current in the insertion and closure, will increase the heat, resulting in the jack temperature is easy to rise, high temperature will change the service life of the circular connector jacks, the general operating temperature of the circular connector jacks -60 -200. 3, salt spray: studies have found that when the temperature is 35 degrees, the concentration of salt solution in the 3% of the time, it will cause corrosion of metal parts, once the circular connector jack metal plate corrosion, performance will decline. In addition, vibration and shock will also affect the service life of the circular connector jack, when the use of the environment there is vibration and shock, will be impressed by the solidity of the circular connector connection, so manufacturers in the production of the time, in order to extend the service life of the product, before leaving the factory will be after the vibration and shock environment test.

Whether the correct use of electronic connectors directly affects the reliability and safety of the connection, the next small make up for you to explain the correct way to use it. In the use of electronic connectors, you should master the correct way to use, and know how to save, so that future use will not appear unnecessary trouble. When we buy electronic connectors, we need to observe the product packaging is not broken, and check the product has no obvious defects and damage. Before using the electronic connectors need to ensure that there are no defects, so that the use of peace of mind. Can not be used in a high-temperature environment, sustained high temperature, high humidity environment, the damage to the electronic connector is more serious, at the same time, also need to avoid using in the environment with chemicals, chemicals will cause the protective layer of the electronic connector corrosion, and even cause damage to the internal current line, the decline in the conductive function. In addition, the electronic connector has an obvious nemesis, that is, grease objects, 㘝hen using, found that the connector above the possession of grease, then be sure to wipe off the grease before reuse.

If you do not need to use the electronic connector for the time being, it needs to be properly placed and stored, pay attention not to be placed in direct sunlight, so as not to oxidize, damage. Can not be placed in a warehouse with more moisture, so as to avoid moisture invasion, rust, insulation degradation, and short-circuit failure when taken out for use in the future. Therefore, it needs to be prevented in a ventilated, dry, cool place. If you need to move the electronic connector, you also need to be more careful, not panic, not violent handling, remember to let it touch the hard objects, not to mention the force of the downward smash.

2, on the federal electronic products network platform related to the introduction and sales of products brief: federal electronic products network - a professional agent / production / sales of all kinds of [connectors | wiring harness | wire and cable products]; if you have a related [connectors | wiring harness | wire and cable products] purchasing / sourcing needs or would like to buy / to understand which connectors | wiring harness | wire and cable products we can provide solutions, please contact our business staff below; If you have related [connectors | harness | wire and cable products] sales / resources and promotion needs, please click on the ¡¡ Business Cooperation ← ¡" and specialists to discuss!