What should we pay attention to when assembling the wire harness processing plant?

What should we pay attention to when assembling the wire harness processing plant: in the assembly process, automotive wire harness processing also need to follow certain principles. Therefore, wire harness processing manufacturers have addressed some of the issues that need attention when assembling electronic wire harnesses: 1. In the assembly process, the price of the wire harness processing plant will not pull the electronic wire harness too tight, which can be avoided when the car driving shaking, resulting in the electronic wire harness support point offset, which may result in the expansion of the distance between the two support points to extend the electronic wire harness, resulting in series or disconnection of the internal structure of the electronic wire harness contacts and change the parameters of the transmission line, and in severe cases, the transmission line will continue to disconnect.2. After the electronic harness is assembled, there must be sufficient clearance around it to pass through it to ensure that it is not subject to stress and tripping over other components to prevent damage to the cable sheath of the electronic harness. Cracking or being pinched off, leading to common failures such as grounding devices.3. No layout in the proximity of the location, the same color and model specifications can be avoided in the assembly process of misplugging, damage to high-power appliances and electronic harnesses.4. The connectors should be set up in an area that is very easy to locate and set up in an area that is very easy for the special tools and their hands to control. It is critical that they be inspected and maintained on a regular basis. The length of the transmission line should be considered in light of the specific assembly. If the electrical components are installed in a very easy to control area, the connector can be omitted to transfer directly to the components; if the installation parts of the electrical components are secret, it will be difficult to check and maintain in the middle and late stages. The length of the transmission line for the electrical component can also be increased appropriately for specific needs so that the connectors are set in areas that are conducive to inspection and maintenance.

2, on the federal electronic products network platform related to the introduction and sales of products brief: federal electronic products network - a professional agent / production / sales of all kinds of [connectors | wiring harness | wire and cable products]; if you have a related [connectors | wiring harness | wire and cable products] purchasing / sourcing needs or would like to buy / to understand which connectors | wiring harness | wire and cable products we can provide solutions, please contact our business staff below; If you have related [connectors | harness | wire and cable products] sales / resources and promotion needs, please click on the ¡¡ Business Cooperation ← ¡" and specialists to discuss!