What are the requirements for wire harness processing?

We usually see the harness is a finished product, but in the harness processing and production process, the requirements of the harness is very strict, so how strict it is? The following Huicheng yuan editorial to give you an introduction: 1, after the terminal pressure on the need to wear rubber shell, this step can not be automated production, only manual, but also need to compare the first piece, the production line employees to be trained to ensure that the rubber shell to wear the right, wear in place, can not be dislodged. 2, the harness is completely made out of the Department of Quality after all the need for full inspection, unqualified, not in place to re-work the product. 3, the incoming material to be the right, to the Raw materials to be correct, to be inspected, from the source to eliminate the production of scrap.

4, if it is other complex harness may also need to wear a sleeve, heat shrinkage, etc. 5, after confirming the material needs to be cut wire and hit the terminal, you need to do a good job of the first piece, the subsequent production and inspection should be the first piece of standard. Above, is the wiring harness processing quality assurance process, each step needs to be careful, to avoid unqualified wiring harness into the next program, said so much, we have no more understanding of some of it.

-6, on the 3M electronic products network platform related to the introduction and sales of products brief: 3M electronic products network - a professional agent / production / sales of a variety of {connectors | wiring harness | wire and cable products }; if you have a related [connectors | wiring harness | wire and cable products] purchasing / sourcing needs or would like to buy / to understand which connectors | wiring harness | wire and cable products we can provide solutions, please contact the Division I business personnel below; If you have related [connector | wire harness | wire and cable production] sales / resources and promotion needs, please click on the ¡¡ Business Cooperation ← ¡" to discuss with a person!