What should I pay attention to when operating board-to-board connectors?

We should all know the life of the board to board connector it, it is basically used in electronic equipment, usually in the application of equipment after a certain period of time, please wait for a few minutes of downtime, to be its board to board connector components may have enough time to dissipate the heat, or else a long time load work, the connector inside the metal terminals will simply lead to accelerate the deterioration of the components and so on, but also because of connector Smaller volume, in case the temperature required to be compatible is not high enough, it will also cause damage to some connector components.

First, for the working environment of the board-to-board connector, but also due to the connector's internal terminals have many plated parts, so please use the connector in some too humid environment, otherwise the humidity will affect the connector's insulation function. Therefore, when choosing connectors, we must pay attention to consider the humidity of the working environment, whether it will affect the connectors in the function of the application. Second, because the plastic box seat of the pairs of board type connector is made in the injection molding stage, usually in the plastic melting and then poured into the metal diaphragm cooling molding. This kind of connector is widely used in electronics, electrical appliances, instrumentation PCB circuit board, its role is in the circuit can not be disconnected within the part or can not be connected between the parts, play a role in connection. This connector application for a long time, its internal deposition of some grease and other liquids, and importantly, there may be some components of the circuit side of the oil dripping into the connector, so the application of the connector, shall be cleaned up on a regular basis in the internal adsorption of water or sundries and other goods, and do not post-deposited too much to prevent the intrusion of the board to board connector interface pins simply will trigger the emergence of certain line of malpractice. Third, the board-to-board connector also because the interface within the end of the pin more, in the daily application of the connector individual close to the use, please pay attention to adhere to these jacks must adhere to the clean, otherwise the board-to-board connector after the operation will be deposited a certain amount of dust and debris, so that it is not time to deal with it, the later will not only affect the connector's functionality of the application, but also produce some details, which will lead to Some insurance risks.

2、About 3M electronic products network platform related to the introduction and sales of products briefly: 3M electronic products network - a professional agent / production / sales of a variety of {connectors | wiring harness | wire and cable products}; if you have a related [connectors | wiring harness | wire and cable products] purchasing / sourcing needs or would like to buy / to understand which connectors | wiring harness | wire and cable products we can provide solutions, please contact the Division I business personnel below; If you have related [connectors | harness | wire and cable products] sales / resources and promotion needs, please click on the ¡¡ Business Cooperation ← ¡" to discuss with a person!