Overall safety testing indicators for power connectors

What are the overall safety testing indicators for power connectors? Today we will give you an introduction. " Not as long as the test part of the qualified can know a device is not really fully in line with the use of standards, and at present we live in the use of connectors there is a more common phenomenon is that in many of the connection installation, are required to connectors have a very good security, and can be adapted to different working environments, which is as if we usually say that a person has to be Flexibility is the same. The plug-in function used here is more comprehensive compared to the past use. From the material is stainless steel heavy metal material, whether it is wear-resistant degree or that the use of the safety factor is much higher than in the past, which is in the specific use of a promotion. In the engineers to build the use of often for a new product has a qualification process, but for the use of the connector is completely trustworthy.

In addition to these can also be used with other original parts, in the system for the setting of these parts will have a maximum limit of requirements, once more than such a provision will appear in the use of a more serious danger, some can be burned inside a lot of parts and thus cause serious fires, so the requirements of the connector has a very good adaptability, will be able to withstand the scope of the set in the relatively large one within the requirements of the system, so that no matter what! From personal use or in the construction of the project have a more complete degree of cooperation. In addition to these tests will also care about the connector model size, some manufacturers in order to save costs, the original thickness to make a change, although the model has not been reduced, but such a change reduces the service life of these connectors, which can be used for many years in a short period of time will be worn out, resulting in circuit interruption, which is a more serious situation. So the current test for the connector, there is a more comprehensive way, using the overall inspection of the way, from the connector's appearance to the internal excuses on the size and diameter will have a more accurate measurement, so that there will be no more serious use of the error, and the test will focus on the detection of interfaces and a few key parts, which increases the connector in the use of the safety and Service life.

2, on the 3M electronic products network platform related to the introduction and sales of products brief: 3M electronic products network - professional agent / production / sales of a variety of {connectors | wiring harness | wire and cable products }; if you have a related [connectors | wiring harness | wire and cable products] purchasing / sourcing needs or would like to buy / to understand which connectors | wiring harness | wire and cable products we can provide solutions, please contact the Division I business personnel below; If you have related [connectors | harness | wire and cable products] sales / resources and promotion needs, please click on the ¡¡ Business Cooperation ← ¡" to discuss with a person!