Categorization:Product Information
Amphenol|Amphenol|Amphenol Connector DensiShield® High-speed cable connector products are a: Amphenol ICC's DensiShield® input/output system is designed to support high-speed serial differential signaling while taking into account customers' device packaging requirements. The high density, high mechanical strength and ease of PCB assembly, coupled with shielding and signal integrity, means that system designers no longer need to resort to trade-offs.DensiShield® connectors are based on a system of wafers with a differential pair structure, where neighboring pairs and wafers are shielded from each other. The 8-pair connector is ideal for 4 bi-directional channels at speeds greater than 2.5Gb/s, the same as an Infiniband or XAUI link, but with higher data rates.DensiShield® connector's long engagement and thin design not only allows system cabling to be more compact than other high-speed systems, but can also be used in dense system designs with board-to-board spaces as low as 15 mm. The connector can also be set up to carry low-speed signals and power and is available in a selectively loaded version, allowing system designers to benefit from the density and strength of this connector system in input/output applications where high-speed signaling is not required.
--Amphenol|Amphenol|Amphenol Connector DDR4 SO-DIMM Memory Module Slot Part Number/Model Number Breakdown:
Amphenol|Amphenol|Amphenol Connectors DensiShield® High Speed Cable Connectors Part Number / Model Number | |||
10044471-121110LF | 10054999-N1000BULF | 10044471-122220ELF | 10044473-103111LF |
10044473-101111LF | 10054999-N1200BULF | 10044473-101122LF | 10044473-103121LF |
10044473-101121LF | 10077488-N0515ADLF | 10044473-102111LF | 10076181-101LF |
10054999-N0100BULF | 10044471-120200LF | 10044473-102112LF | 10054999-R0100BULF |
10054999-N0200BULF | 10044471-122220LF | 10044473-102121LF | 10054999-R1000BULF |
2, Amphenol | Amphenol | Amphenol Connectors DensiShield ® high-speed cable connector features and benefits:
Features and Benefits | |
The ability to install these 8 pairs of connectors side-by-side at 12.5mm spacing allows for multiple input/output interfaces to be designed along the card edge. | |
Rugged strain relief covers and short wire leads reduce the distance between the rack panel and the cabinet door or wall. | |
Lower vertical height allows for use in systems with slot clearances of 15 mm pitch | |
Low crosstalk between differential pairs, 100 ohm impedance matched to 100 ohm shielded twisted pair cable | |
Crimp ferrule system to reliably terminate the EMC shield of the cable to the connector housing | |
Rack panel ruggedized EMC shroud terminated to PCB layer with shielding material | |
Signal ground isolated from EMC ground | |
PCB connectors compatible with SMT reflow process | |
Redundancy and long-term reliability of the double girder terminal system | |
RoHS compliant |
-3, on the federal electronic products network platform related to the introduction and sales of products brief: federal electronic products network - agent sales [Amphenol connectors - Amphenol | Amphenol | Amphenol connectors DensiShield ® high-speed cable connectors] as well as the content of the first item in the table list of all (material number / model) connector products; I specialize in the agency / production / sales of a variety of {connectors | harness | wire and cable products}; if you have a related [connectors | harness | wire and cable products] procurement / purchasing needs or want to buy / to understand what we can provide connectors | harness | wire and cable products solutions, please contact our business staff below; if you have a related [connectors | harness | wire and cable products] sales / resources and promotional needs, click on the ¡°Business Cooperation ← ¡± and specialists for If you have related [connector | wire harness | cable products] sales / resources and promotion needs, please click "→Business Cooperation ←" with a person to negotiate!