What are plate crimp terminals? What are the differences and similarities?

The main rail type terminals are:Voltage terminals, current terminals, board terminals, transformer terminals. Relay modules, signal isolation terminals and so on. In the process of dealing with customers, it is often asked are black plate terminals, what is the difference? Plate terminals, as the name suggests, is the use of plate crimping method of terminals. Plate crimping is through the end of the wire connected between the gasket and conductive parts, by tightening the screws on top of the gasket, to realize the fastening of the wiring. Plate compression terminals with wiring intuitive, affordable and other advantages in the terminal market occupies an important place. This article focuses on the five products to analyze the similarities and differences.

Plate pressure wire terminals of the same: 1. Insulation materials are PC, high hardness, good impact toughness, not easy to deform, insulation and thermal stability; 2. These five types of plate terminals are equipped with a transparent cover cover, to facilitate the maintenance of the later at the same time, but also effectively block most of the dust into the; 3. Plate pressure wire terminals are installed and used in the environment is more or less the same: mechanical control, power supply interfaces, electronic control cabinets, transformers, elevators, and other fields. etc. Plate pressure wire terminal differences: 1. In the rail installation, JHY1/JH9 series terminals need to be installed rail to use, TC2/TR series installation and not installed rail can be used, TB1 series can not be installed on the rail to use; 2. In the terminal splicing, JHY1/JH9/TR three series of products can be according to their own needs will be a different color, a different number of digits, Different current terminals installed on the same rail; TB1/TC2 series terminals can only be selected according to the need for a fixed number of bits, can not be spliced. 3. In terms of terminal material, in addition to PC material, TB1 series terminals can also be customized PA material of high-end quality; 4. In terms of transparent cover cover, the TB1 series adopts a hollowed-out design, which is more convenient for the installation of the screws. 5. In terms of the current size, JHY1 and TC2 series can be installed on the guide rail according to their own needs. JHY1 and TC2 series of larger current up to 300A, TR larger current up to 200A, JH9 larger current up to 150A, TB1 terminals are relatively small, up to 60A. Given the application of the plate pressure terminal environment is basically the same, so the purchase of the type of terminal customers need to select according to their own installation habits.

2, on the 3M electronic products network platform related to the introduction and sales of products brief: 3M electronic products network - professional agent / production / sales of a variety of {connectors | wiring harness | wire and cable products }; if you have a related [connectors | wiring harness | wire and cable products] purchasing / sourcing needs or would like to buy / to understand which connectors | wiring harness | wire and cable products we can provide solutions, please contact the Division I business personnel below; If you have related [connectors | harness | wire and cable products] sales / resources and promotion needs, please click on the ¡¡ Business Cooperation ← ¡" to discuss with a person!