What do I need to pay attention to when storing terminal cables? How do I achieve product protection for terminal cables?

Although the terminal wire has no impact in the normal storage environment, there are also some factors that need to be paid attention to during the storage process. So what factors need to be paid attention to during the storage process? The following will explain to us the key points to pay attention to when registering terminal wires. 1. Avoid storage in the open air as much as possible. 2. When the terminal wire is at a lower temperature (generally about 5 °C and below), do not throw or drop the wire, because it may cause the insulation sheath to crack. 3. When hoisting the packaging of the terminal wire, it is strictly forbidden to hoist several coils at the same time. Since the weight of one roll of electronic wire should be light, it should be packaged in cartons for reinforcement. Because the connector of the terminal wire is a plastic part, it should be sealed in a packaging bag and handled carefully. When stored on vehicles, ships and other means of transportation, the wire reel should be fixed with appropriate methods to avoid collision or overturning, so as to avoid mechanical damage to the wire. 4. It should be noted that contact with acids, alkalis and mineral oils is strictly prohibited, and it should not be stored in isolation from these aggressive substances. There should be no harmful gases that damage insulation and erode metals in the warehouse where wires are stored. 5. During the storage period, the terminal wire should be moved once on schedule (once every three months in summer, and can be postponed as appropriate in other seasons). When moving, roll the edge of the downward storage tray upward to prevent the bottom surface from getting damp and decaying. And always pay attention to whether the wire head is intact when storing. 6. The storage period should be limited to the ex-factory period of the product. Generally, it should not exceed one and a half years, and the longest should not exceed two years.

-------------------------------------------------------------------------------------------------

Everyone knows that the terminal design is precise, and slight touch will lead to deformation. This deformation will lead to assembly difficulties in light cases and poor electrical performance in serious cases. Next, we will introduce how professional terminal wire processing factories achieve terminal wire protection! When the terminals are supplied, most of them are mounted on disks, and some ring terminals are mounted on shafts. The chain-shaped terminals are protected by paper tape, and the outside is protected by paper custom plates or plastic shafts. During the production process, there are corresponding shafts on the terminal machine to fix the terminal plate! After drawing the terminal wire, put it in a fixed cup, protect it with a rubber band, and then put it inside the custom-made box. When packaging, if there are exposed terminals, bubble bags will be added for protection. The wiring harness is composed of two parts: connector and wire. Here is an introduction to the structure and function of the terminals in the connector: 1. Contact end (contact part): the part that makes power contact with the pins of the needle hub; 2. Wire barrel: the part where the conductor is crimped; 3. Insulation cylinder: the part that fixes the wire insulation skin; 4. Bell-shaped inlet sleeve: the part that protects the wire from breaking and surface wear; 5. Spear hook: locking hook when inserted into the shell; 6. Cut-off piece: the residual part after the tape is cut; 7. Serrated protrusion: a slot in the wire barrel to ensure good contact of wires;

---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- If you have related [connector wiring harness and cable production] purchasing/purchasing needs or want to purchase/understand which connector wiring harness and cable product solutions we can provide, please contact our business staff below; If you have related sales/resources and promotion needs of [Connector Wiring Harness and Cable Production], please click "→ Business Cooperation ←" to negotiate with a dedicated person!