en

Design of cables in the construction of photovoltaic power plants

Work process: material a transportation, storage - cable pipe laying and cable bridge installation - insulation resistance test before cable installation - cable laying. 1. cable laying should be chec...

Product Information

How to install the data cable driver for Micro connector

Sometimes when you want to transfer computer information to your cell phone via data cable, after connecting, the system prompts you to install new hardware, but you can't install it after Z. If ...

Product Information

Prevent cable ignition by sealing, plugging, coating and wrapping.

Fireproof coating has a thin coating, does not affect the normal heat dissipation, at the same time can play a good heat insulation and flame retardant effect and so on, but there are also many defect...

Product Information

DC connector called DC socket

DC connectors are electrical connectors used to supply direct current to the power grid. In contrast to household AC power plugs and sockets, DC connectors come in a number of non-interchangeable stan...

Product Information

10kV rubber-plastic cold-shrinkable power cable head fabrication requirements

1. Strip the outer sheath, armor and inner lining layer. Straighten the cable, wipe it clean, strip the outer sheath of A+ terminal depth (C) long, tie the line, leave the steel armor 30mm, inner lini...

Product Information

Pin probe connectors pay attention to these issues, life can be extended

Electrical failure: This kind of failure generally refers to the connection problem between the wire and the terminal, and is also a factor that directly affects the service life of the pin probe conn...

Product Information

Selection of type- c connectors in different environments

The type-c connector makes it easy to add devices to a computer without taking up the computer's parallel and serial ports. The devices can be used as long as they are plugged in, but sometimes t...

Product Information

What is the effect of water on the performance of cross-linked power cable products?

Cross-linked power cables into the water is mainly divided into conductor into the water and the sheath into the water (including the inner protection), water or moisture for the cable used in polymer...

Product Information

What are the features of Type-C connectors?

Transfer rates are efficient and fast: In theory, USB-C ports have a Z-high transfer rate of 10Gb per second, but Apple says the new MacBooks have a Z-high transfer rate of 5Gbps on the USB-C ports. T...

Product Information

Power cable installation, laying must be mastered when the 9 points

10KV power cable as part of the power line, the use of this cable, due to the low chance of failure, safe and reliable, out of the line flexible and widely used. But with the use of a long time, once ...

Product Information

What happens when a TYPE-C connector fails?

TYPE-C connectors are also known as usb-C. The market has been slowly occupied by TYPE-C connectors, and many ordinary connectors are slowly eliminated. In this emerging industry, only innovation is t...

Product Information

What is the method of finding broken cores in flame retardant cables?

Energized capacitance method: some wire and cable manufacturers in this regard is usually the practice of capacitance comparison method to, find the approximate location of the broken wire. With conti...

Product Information

How can Type-C connectors minimize loss from plugging and unplugging?

The use of TYPE-C connector for the day is now inseparable, in the process of using the TYPE-C connector will often plug and unplug the TYPE-C connector, the moment will be presented TYPE-C connector ...

Product Information

What is the relationship between sheath thickness and power cable quality?

Product quality is good or bad, the first manifestation of the product is the appearance of the quality of this product, no matter what kind of product, in the production must pay attention to the app...

Product Information

What are the two interfaces of the MICRO USB 3.0 connector?

The kind of mobile hard disk is indeed MICRO USB 3.0 interface (also said miniUSB3.0) USB3.0 compared to 2.0 to add 5 contacts. Because USB3.0 has backward compatibility, can be compatible with 2.0 ca...

Product Information

Common causes of appearance defects in rubber cables

In the production process of rubber cables, there are often appearance defects, such as the surface is not smooth; the surface of the clinker particles (early vulcanization of rubber particles) or imp...

Product Information

What is the db connector interface?

Connectors generally have an external connector and internal terminals. Connectors are generally insulators, such as plastic materials, divided into male and female, connected to the role of fixed. Te...

Product Information

Why is it necessary to use copper core cables for mine production?

Mine production is a huge and systematic project, and compared with most occupations, work in the mine is considered a high-risk type of work, in the mine operation, power protection can be said to be...

Product Information

What are the performance characteristics of medical connectors concern

With the development of medical technology, a lot of medical equipment have realized the connection of the components, has reached a greater role, which is the need to be connected through the medical...

Product Information

How to correctly identify false breakdowns in medium voltage cross-linked cables

Medium-voltage cross-linked power cables factory partial discharge and high-voltage test is carried out in the shielded room disk by disk, then you can consider re-replacing the insulated wire core fo...

Product Information