2024-09-05
The outlets in the ring structure of the CNC lathe harness are connected in a closed ring transmission line through an active interface, which is a point-to-point structure. Each outlet in the ring st...
2024-09-05
Outdoor Wire Manufacturer's wire connectors are widely used as they play a vital role in the construction of electronic devices. At the current stage, there are many types of wire connectors avai...
2024-09-05
In many environments where water and electricity are used together, it is important that something exists to harmonize the water and electricity without compromising their functions. In order to achie...
2024-09-05
Automotive wiring harness due to the performance of the car more wiring harness is also more complex, and in the processing of wiring harness materials are also different from the general electronic w...
2024-09-05
The contact impedance of the electronic connector in the use of the term, in order to reduce the loss or attenuation of the signal and energy in the transmission process; contact impedance this parame...
2024-09-05
Designed and realized the automatic layout algorithm of inline process card, the algorithm can correctly deal with a variety of inline forms, generate the data needed to draw the inline process card, ...
2024-09-05
Regarding the mechanical properties of the board-to-board connector slot, from the point of view of the connection function, the board-to-board connector insertion and extraction force is one of the i...
2024-09-05
Stable raw material supply channels: good technology, good equipment, if the lack of stable quality of raw materials to cooperate, or difficult to produce qualified wiring harness products. If the fre...
2024-09-05
The main features of SATA connectors are hot-plugging and faster data transfer rates, with data transfer rates supporting 1.5Gb/s to 12Gb/s. The advantages of SATA connectors for 7PIN and 22PIN hard d...
2024-09-05
Selection is made according to the ambient temperature, for example: the ambient temperature around the engine is high, and there are many corrosive gases and liquids. Therefore, we must use high temp...
2024-09-05
When choosing usb connectors, there are many factors to consider, among which the environmental parameters are one of the most important factors, including temperature, humidity, air pressure and so o...
2024-09-05
Connection of terminals and wires: around the shipping terminal, must be wound 1 to 2 turns; cup-shaped terminals along the side of the longer inner wall tightly connected; cylindrical terminals great...
2024-09-05
LED lighting, as a new green lighting technology, has the advantages of high light conversion efficiency, low energy consumption, long life and maintenance-free. And gradually applied to a variety of ...
2024-09-05
The sealing of the connector must be strong and reliable to protect the electronics from moisture, media or corrosion. Automotive suppliers often use silver-plated r connector pins because silver is l...
2024-09-05
1.Copper rod: made of recycled waste copper, oxidized and discolored surface, insufficient tension, not round.2.PVC plastic: more impurities, unqualified heat loss, porosity in extruded layer, plastic...
2024-09-05
In the connector industry, we hear about different types of connectors, of which there are three basic types namely wire-to-wire, wire-to-board and board-to-board depending on the properties of the tw...
2024-09-05
Wiring Harness Manufacturing Process Overview: The HXN5 locomotive has approximately 30 wiring harnesses, of which the Z harness consists of approximately 1,000 wires of varying lengths and sizes, and...
2024-09-05
People put forward higher and higher requirements for the safety, comfort, environmental protection and intelligence of automobiles, and automotive electronic products such as car audio, GPS navigatio...
2024-09-05
Currently waterproof wiring harness is mainly used in three fields:Battery, automobile, waterproof electronic equipment and other fields. The main materials of waterproof battery wiring harnesses are ...
2024-09-05
If the rated current is exceeded, it will lead to heat, smoke and fire abnormality, damage the machine, or even cause an accident. So when using it, please make sure to confirm the specification. Smar...
