2024-07-10
Principle of operation: voltage withstand test is to check whether the specified voltage is applied between the contacts of the connector (or between the contacts and the shell), between the connectin...
2024-07-10
Wiring harnesses play a bridge role in the electronics and general mechanical equipment industry, mainly used as a wiring element in the circuit to connect a variety of electrical equipment. It consis...
2024-07-10
Maintenance of the wiring harness needs the following aspects to consider, one is the selection of the wiring harness itself, the second is the wiring harness in the wire joints maintenance, the third...
2024-07-10
Automotive wires, also known as low voltage wires, are different from general household wires. General household wires are copper single-piston wires, there is a certain hardness. And car wires are co...
2024-07-10
Automotive wiring harness is the main body of the network of automotive circuits, there is no wiring harness there is no automotive circuits. Wiring harness refers to the copper punching and into the ...
2024-07-10
Is there a difference between general wiring harness and automotive wiring harness? Automotive wiring harness standard requirements for the material is also very serious: including its electrical func...
2024-07-10
Connecting the vehicle wiring harness aperture is mainly used for rubber transition parts, play a wear-resistant, waterproof, sealing and other roles. Introduces the wiring harness rubber products sel...
2024-07-10
Automotive wiring harness manufacturers in China started late, in the wiring harness processing technology is not as sophisticated as foreign automotive wiring harness manufacturers, so the processing...
2024-07-10
Connector degradation mechanisms are very important to connector performance and critical to the performance assurance of related products. What are the degradation mechanisms? What factors contribute...
2024-07-10
With the modern automobile safety, comfort and environmental protection requirements continue to improve, the number of circuits on the car and power consumption increased significantly, so that many ...
2024-07-10
Minefield 1: Using the wrong connector or a defective connector. 2.4 mm connectors should not be mixed with 2.92 mm, 3.5 mm and SMA connectors. Incorrect usage can lead to permanent mechanical damage....
2024-07-10
An electrical connector is a small device used for the safety of household appliances. The electrical connector is fixed to one end of the socket. After the socket is secured to one end by soldering t...
2024-07-10
Automotive wiring harness in the use of the process will often appear broken, torn, disconnected, parts lost, these situations occur will form a car wiring harness wiring due to heat, conflict and acc...
2024-07-10
Robot wiring harness is used for robot system and mobile equipment, production line, robot arm and other occasions, in order to dry or humid indoor environment cable life can be longer, the harness is...
2024-07-10
When connectors are corroded, their service life is shortened and they can also lead to circuit failures. So under what circumstances will the connector be corroded, what are the main factors? Huichen...
2024-07-10
For connectors, non-industry people may be relatively unfamiliar. Here the engineers of Huicheng Yuan Electronics will introduce the basic knowledge of connectors to you. Generally speaking, a connect...
2024-07-10
In the near future, household appliances will become smarter, more efficient and more practical than ever before. Whether it's large appliances and components such as air conditioners, refrigerators, ...
2024-07-10
Insertion and extraction force is a key indicator of the connector, which is directly related to the performance and use of the connector. What is the insertion and extraction force? The insertion and...
2024-07-10
What are the test methods for board-to-board connectors? There are many board-to-board connectors in our life, mainly because it can improve efficiency and save costs; the application needs to underst...
2024-07-10
A connector is a component that electronic engineers and technicians often come into contact with. Its role is very simple: in the circuit is blocked at the place or isolated between the circuit, set ...
